Intel DG45ID USB 2.0 Headers, Front Panel Header Signal Names, USB 2.0 Header Signal Names

Page 48

Intel Desktop Board DG45ID Product Guide

Front Panel Header

See Figure 21, I for the location of the multi-colored front panel header. Table 13 shows the pin assignments for the front panel header.

Table 13. Front Panel Header Signal Names

Pin

Description

In/Out

Pin

Description

In/Out

 

 

 

 

 

 

 

Hard Drive Activity LED

 

 

Power LED

 

 

 

 

 

 

 

1

Hard disk LED pull-up to +5 V

Out

2

Front panel green LED

Out

 

 

 

 

 

 

3

Hard disk active LED

Out

4

Front panel yellow LED

Out

 

 

 

 

 

 

 

Reset Switch

 

 

On/Off Switch

 

 

 

 

 

 

 

5

Ground

 

6

Power switch

In

 

 

 

 

 

 

7

Reset switch

In

8

Ground

 

 

Power

 

 

Not Connected

 

 

 

 

 

 

 

9

Power

Out

10

No pin

 

 

 

 

 

 

 

USB 2.0 Headers

See Figure 21, J for the location of the three USB 2.0 headers. Table 14 shows the pin assignments for each USB 2.0 header. Each USB header can be used to connect two USB devices.

Table 14. USB 2.0 Header Signal Names

 

USB Port A

 

 

Pin

Signal Name

 

 

1

Power (+5 V)

 

 

3

D-

 

 

5

D+

7Ground

9Key

 

USB Port B

Pin

Signal Name

 

 

2

Power (+5 V)

 

 

4

D-

 

 

6

D+

 

 

8

Ground

 

 

10

No Connection

 

 

Note: USB ports may be assigned as needed.

NOTE

Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device.

48

Image 48
Contents Intel Desktop Board DG45ID Product Guide Revision History FCC Declaration of ConformityCanadian Department of Communications Compliance Statement DisclaimerPreface Intended AudienceUse Only for Intended Applications Document OrganizationTerminology Intel Desktop Board DG45ID Product GuideTerm Description Contents Installing and Replacing Desktop Board Components Configuring for RAID Intel Matrix Storage Technology Intel ContentsTables Desktop Board Features Feature SummaryPower Management PeripheralInterfaces HardwareDesktop Board Features Desktop Board ComponentsLabel Description Processor Main MemoryIntel G45 Express Chipset Intel G45 Graphics SubsystemDVI-I Support HDMI* Technology SupportAudio Subsystem Intel Viiv TechnologyPCI Express x16 Graphics Legacy Input/Output I/O Controller LAN SubsystemLAN Subsystem Software Audio Jack Retasking SupportLAN Status Indicators LAN Connector LEDsHi-Speed USB 2.0 Support LED Color LED State IndicatesIntel Rapid Recover Technology Intel RRT Serial ATAExpandability Serial ATA RAIDSerial ATA Auto Configuration PCI and PCI Express* Auto ConfigurationSecurity Passwords Hardware Management Features Fan Speed, Thermal, and Voltage Monitoring and ControlChassis Intrusion Power Management Features Power ConnectorsHardware Support Fan Headers LAN Wake CapabilitiesInstantly Available PC Technology +5 V Standby Power Indicator Location of the +5 V Standby Power IndicatorBattery SpeakerReal-Time Clock Energy STAR* QualifiedIntel Desktop Board DG45ID Product Guide Installing and Replacing Desktop Board Components Before You BeginInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing the I/O Shield Installing and Replacing Desktop Board ComponentsInstalling and Removing the Desktop Board Desktop Board DG45ID Mounting Screw Hole LocationsInstalling and Removing a Processor Installing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Installing a Processor Fan Heat Sink Close the Load PlateConnecting the Processor Fan Heat Sink Cable Removing the ProcessorInstalling and Removing Memory Guidelines for Dual Channel Memory ConfigurationTwo or Four DIMMs Dual Channel Memory Configuration with Four DIMMs Three DIMMsInstalling DIMMs Use DDR2 DIMMsInstalling a Dimm Removing DIMMs Installing and Removing a PCI Express x16 Card Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Removing a PCI Express x16 CardConnecting Serial ATA Sata Cables Connecting a Serial ATA CableConnecting to Internal Headers and Connectors Internal Headers and ConnectorsPdif Connector HD Audio Link HeaderFront Panel HD Audio Header Front Panel CIR Receiver Input Header Signal Names Back Panel CIR Emitter Output Header Signal NamesPin Signal Name Ground Consumer IR CIR HeadersAlternate Front Panel Power LED Header Serial Port HeaderChassis Intrusion Header Front Panel Header Signal Names USB 2.0 Header Signal NamesFront Panel Header USB 2.0 HeadersConnecting to the Audio System Ieee 1394a Header Signal NamesIeee 1394a Header Connecting Chassis Fan and Power Supply Cables Chassis Fan CablesPower Supply Cables Connecting Power Supply CablesSetting the Bios Configuration Jumper Location of the Bios Configuration Jumper BlockClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Replacing the Battery PrecautionViktigt Προσοχή Upozornenie Intel Desktop Board DG45ID Product Guide Removing the Battery Intel Desktop Board DG45ID Product Guide Updating the Bios Updating the Bios with the Intel Express Bios Update UtilityObtaining the Bios Update File Updating the Bios with the ISO Image Bios Update FileUpdating the Bios with the Iflash Memory Update Utility Updating the BiosRecovering the Bios Configuring the Bios for Intel Matrix Storage Technology Creating Your RAID SetSetting Up a RAID Ready System Configuring for Intel Rapid Recover Technology Enabling Intel Rapid Recover TechnologyGo to Advanced Drive Configuration Creating a Recovery Volume Creating a Recovery Volume Using the RAID OptionSelect Protect data using Intel Rapid Recover Technology Disk Synchronization Mode Mounting the Recovery DiskConfiguring for Intel Rapid Recover Technology Select Access Recovery Drive Files Error Messages and Indicators Bios Beep CodesBios Error Messages Bios Error MessagesIntel Desktop Board DG45ID Product Guide Safety Standards Place Battery MarkingSafety Standards Regulatory ComplianceEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Deutsch EspañolFrançais MalayPortuguese RussianTürkçe Lead-free 2LI/Pb-free 2LI Board Restriction of Hazardous Substances RoHS EU RoHSLead-Free Second Level Interconnect Marks Description MarkChina RoHS China RoHS Environmentally Friendly Use Period MarkRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Chassis and Component Certifications EuropeIntel Desktop Board DG45ID Product Guide

DG45ID specifications

The Intel DG45ID is a motherboard that showcases Intel's commitment to integrating advanced technologies for personal computing. Designed primarily for the Intel LGA 775 socket, this motherboard supports a range of Intel processors, including Core 2 Quad, Core 2 Duo, and Pentium D. It caters to users looking for a blend of performance and multimedia capabilities, making it suitable for both casual users and gamers.

One of the standout features of the DG45ID is its support for Intel's Desktop Board DQ45ID, which incorporates several cutting-edge technologies. The motherboard boasts an Intel Q45 Express chipset, ensuring optimized performance and efficient power management. With support for up to 8 GB of DDR2 800/667 MHz memory, the DG45ID handles multitasking and demanding applications with ease, allowing users to run multiple applications without significant slowdowns.

A significant characteristic of the DG45ID is its integrated Intel Graphics Media Accelerator 4500. This graphics solution offers decent performance for everyday tasks and casual gaming without the need for a dedicated graphics card. Users can benefit from features such as dual-display support and hardware acceleration for high-definition video playback, which enhances the overall multimedia experience.

The DG45ID also includes a range of connectivity options. Equipped with multiple USB ports, a Gigabit Ethernet LAN, and integrated audio featuring 5.1 surround sound, users can connect to a variety of devices and establish a comprehensive multimedia setup. The motherboard features SATA II connectors for speedy data transfer, supporting quick connections to hard drives and solid-state drives, ensuring efficient storage management.

For those who prioritize expandability, the DG45ID provides a PCI Express x16 slot for a dedicated graphics card, in addition to multiple PCI Express x1 and legacy PCI slots for additional expansion cards. This allows users to upgrade their systems over time, ensuring longevity and flexibility.

Finally, the DG45ID is designed with reliability in mind, featuring an array of safety and stability features, including advanced thermal management, which helps maintain optimal operating temperatures. Overall, the Intel DG45ID motherboard provides a robust platform for users seeking solid performance, versatile connectivity, and multimedia capabilities in a competitive computing environment. Its blend of technology and design makes it an excellent choice for a wide range of computing needs.