Intel DG45ID manual Expandability, Serial ATA RAID, Intel Rapid Recover Technology Intel RRT

Page 19

Desktop Board Features

Serial ATA

The Desktop Board supports six Serial ATA channels (3.0 Gb/s) via ICH10R, connecting one device per channel. One channel is configured as an eSATA channel.

Serial ATA RAID

ICH10R supports Intel® Matrix Storage Technology which enables the following RAID (Redundant Array of Independent Drives) levels:

RAID 0 - data striping

RAID 1 - data mirroring

RAID 0+1 (or RAID 10) - data striping and mirroring

RAID 5 - distributed parity

For information on configuring your system for RAID using Intel Matrix Storage Technology see Chapter 4.

Intel® Rapid Recover Technology (Intel® RRT)

The Desktop Board supports Intel Rapid Recover Technology which enables fast and easy recovery of your data in the event of a hard drive failure. It allows you to maintain a complete copy of your primary or master drive onto a second hard drive, the recovery drive. If the master hard drive should fail, either from a mechanical failure or the result of a virus, recovery is as simple as booting from the recovery drive. The recovery drive can be attached to your system via any standard SATA or eSATA connection.

Intel Rapid Recover Technology also provides the added benefit of allowing the recovery drive to be mounted as a read-only volume so you can quickly copy files from the recovery drive when individual files need to be recovered.

For information on configuring your system for Intel Rapid Recover Technology see Chapter 5.

Expandability

For system expansion, the Desktop Board provides the following expansion slots:

One PCI Express 2.0 x16 connector (compatible with PCI Express 1.1 add-in cards)

Two PCI Express 1.1 x1 connectors

One PCI bus connector

19

Image 19
Contents Intel Desktop Board DG45ID Product Guide Disclaimer Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementDocument Organization PrefaceIntended Audience Use Only for Intended ApplicationsIntel Desktop Board DG45ID Product Guide TerminologyTerm Description Contents Installing and Replacing Desktop Board Components Contents Configuring for RAID Intel Matrix Storage Technology IntelTables Feature Summary Desktop Board FeaturesHardware Power ManagementPeripheral InterfacesDesktop Board Components Desktop Board FeaturesLabel Description Main Memory ProcessorIntel G45 Graphics Subsystem Intel G45 Express ChipsetHDMI* Technology Support DVI-I SupportIntel Viiv Technology Audio SubsystemPCI Express x16 Graphics Audio Jack Retasking Support Legacy Input/Output I/O ControllerLAN Subsystem LAN Subsystem SoftwareLED Color LED State Indicates LAN Status IndicatorsLAN Connector LEDs Hi-Speed USB 2.0 SupportSerial ATA RAID Intel Rapid Recover Technology Intel RRTSerial ATA ExpandabilityPCI and PCI Express* Auto Configuration Serial ATA Auto ConfigurationSecurity Passwords Fan Speed, Thermal, and Voltage Monitoring and Control Hardware Management FeaturesChassis Intrusion Power Connectors Power Management FeaturesHardware Support LAN Wake Capabilities Fan HeadersInstantly Available PC Technology Location of the +5 V Standby Power Indicator +5 V Standby Power IndicatorEnergy STAR* Qualified BatterySpeaker Real-Time ClockIntel Desktop Board DG45ID Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board DG45ID Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Close the Load Plate Installing a Processor Fan Heat SinkRemoving the Processor Connecting the Processor Fan Heat Sink CableGuidelines for Dual Channel Memory Configuration Installing and Removing MemoryTwo or Four DIMMs Three DIMMs Dual Channel Memory Configuration with Four DIMMsUse DDR2 DIMMs Installing DIMMsInstalling a Dimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers and Connectors Connecting to Internal Headers and ConnectorsHD Audio Link Header Pdif ConnectorFront Panel HD Audio Header Consumer IR CIR Headers Front Panel CIR Receiver Input Header Signal NamesBack Panel CIR Emitter Output Header Signal Names Pin Signal Name GroundSerial Port Header Alternate Front Panel Power LED HeaderChassis Intrusion Header USB 2.0 Headers Front Panel Header Signal NamesUSB 2.0 Header Signal Names Front Panel HeaderIeee 1394a Header Signal Names Connecting to the Audio SystemIeee 1394a Header Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperJumper Settings for the Bios Setup Program Modes Clearing PasswordsJumper Setting Mode Description Precaution Replacing the BatteryViktigt Προσοχή Upozornenie Intel Desktop Board DG45ID Product Guide Removing the Battery Intel Desktop Board DG45ID Product Guide Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the ISO Image Bios Update File Obtaining the Bios Update FileUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityRecovering the Bios Creating Your RAID Set Configuring the Bios for Intel Matrix Storage TechnologySetting Up a RAID Ready System Enabling Intel Rapid Recover Technology Configuring for Intel Rapid Recover TechnologyGo to Advanced Drive Configuration Creating a Recovery Volume Using the RAID Option Creating a Recovery VolumeSelect Protect data using Intel Rapid Recover Technology Mounting the Recovery Disk Disk Synchronization ModeConfiguring for Intel Rapid Recover Technology Select Access Recovery Drive Files Bios Error Messages Error Messages and IndicatorsBios Beep Codes Bios Error MessagesIntel Desktop Board DG45ID Product Guide Regulatory Compliance Safety StandardsPlace Battery Marking Safety StandardsEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Malay DeutschEspañol FrançaisRussian PortugueseTürkçe Lead-free 2LI/Pb-free 2LI Board Description Mark Restriction of Hazardous Substances RoHSEU RoHS Lead-Free Second Level Interconnect MarksChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Board-Level Certification Markings Product CertificationsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DG45ID Product Guide

DG45ID specifications

The Intel DG45ID is a motherboard that showcases Intel's commitment to integrating advanced technologies for personal computing. Designed primarily for the Intel LGA 775 socket, this motherboard supports a range of Intel processors, including Core 2 Quad, Core 2 Duo, and Pentium D. It caters to users looking for a blend of performance and multimedia capabilities, making it suitable for both casual users and gamers.

One of the standout features of the DG45ID is its support for Intel's Desktop Board DQ45ID, which incorporates several cutting-edge technologies. The motherboard boasts an Intel Q45 Express chipset, ensuring optimized performance and efficient power management. With support for up to 8 GB of DDR2 800/667 MHz memory, the DG45ID handles multitasking and demanding applications with ease, allowing users to run multiple applications without significant slowdowns.

A significant characteristic of the DG45ID is its integrated Intel Graphics Media Accelerator 4500. This graphics solution offers decent performance for everyday tasks and casual gaming without the need for a dedicated graphics card. Users can benefit from features such as dual-display support and hardware acceleration for high-definition video playback, which enhances the overall multimedia experience.

The DG45ID also includes a range of connectivity options. Equipped with multiple USB ports, a Gigabit Ethernet LAN, and integrated audio featuring 5.1 surround sound, users can connect to a variety of devices and establish a comprehensive multimedia setup. The motherboard features SATA II connectors for speedy data transfer, supporting quick connections to hard drives and solid-state drives, ensuring efficient storage management.

For those who prioritize expandability, the DG45ID provides a PCI Express x16 slot for a dedicated graphics card, in addition to multiple PCI Express x1 and legacy PCI slots for additional expansion cards. This allows users to upgrade their systems over time, ensuring longevity and flexibility.

Finally, the DG45ID is designed with reliability in mind, featuring an array of safety and stability features, including advanced thermal management, which helps maintain optimal operating temperatures. Overall, the Intel DG45ID motherboard provides a robust platform for users seeking solid performance, versatile connectivity, and multimedia capabilities in a competitive computing environment. Its blend of technology and design makes it an excellent choice for a wide range of computing needs.