Intel DG45ID manual Preface, Intended Audience, Use Only for Intended Applications, Conventions

Page 3

Preface

This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel® Desktop Board DG45ID.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization

The chapters in this Product Guide are arranged as follows:

1Desktop Board Features: a summary of product features

2Installing and Replacing Desktop Board Components: instructions on how to install the Desktop Board and other hardware components

3Updating the BIOS: instructions on how to update the BIOS

4Configuring for RAID (Intel® Matrix Storage Technology (Intel® MST)): information about configuring your system for RAID

5Configuring for Intel® Rapid Recover Technology (Intel® RRT): information about configuring your system for Intel Rapid Recover Technology

AError Messages and Indicators: information about BIOS error messages and beep codes

BRegulatory Compliance: safety standards, regulations, and product certifications

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

iii

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Intel Desktop Board DG45ID Product Guide Disclaimer Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementDocument Organization PrefaceIntended Audience Use Only for Intended ApplicationsTerminology Intel Desktop Board DG45ID Product GuideTerm Description Contents Installing and Replacing Desktop Board Components Contents Configuring for RAID Intel Matrix Storage Technology IntelTables Feature Summary Desktop Board FeaturesHardware Power ManagementPeripheral InterfacesDesktop Board Components Desktop Board FeaturesLabel Description Main Memory ProcessorIntel G45 Graphics Subsystem Intel G45 Express ChipsetHDMI* Technology Support DVI-I SupportAudio Subsystem Intel Viiv TechnologyPCI Express x16 Graphics Audio Jack Retasking Support Legacy Input/Output I/O ControllerLAN Subsystem LAN Subsystem SoftwareLED Color LED State Indicates LAN Status IndicatorsLAN Connector LEDs Hi-Speed USB 2.0 SupportSerial ATA RAID Intel Rapid Recover Technology Intel RRTSerial ATA ExpandabilitySerial ATA Auto Configuration PCI and PCI Express* Auto ConfigurationSecurity Passwords Hardware Management Features Fan Speed, Thermal, and Voltage Monitoring and ControlChassis Intrusion Power Management Features Power ConnectorsHardware Support Fan Headers LAN Wake CapabilitiesInstantly Available PC Technology Location of the +5 V Standby Power Indicator +5 V Standby Power IndicatorEnergy STAR* Qualified BatterySpeaker Real-Time ClockIntel Desktop Board DG45ID Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board DG45ID Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Close the Load Plate Installing a Processor Fan Heat SinkRemoving the Processor Connecting the Processor Fan Heat Sink CableInstalling and Removing Memory Guidelines for Dual Channel Memory ConfigurationTwo or Four DIMMs Three DIMMs Dual Channel Memory Configuration with Four DIMMsUse DDR2 DIMMs Installing DIMMsInstalling a Dimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers and Connectors Connecting to Internal Headers and ConnectorsPdif Connector HD Audio Link HeaderFront Panel HD Audio Header Consumer IR CIR Headers Front Panel CIR Receiver Input Header Signal NamesBack Panel CIR Emitter Output Header Signal Names Pin Signal Name GroundAlternate Front Panel Power LED Header Serial Port HeaderChassis Intrusion Header USB 2.0 Headers Front Panel Header Signal NamesUSB 2.0 Header Signal Names Front Panel HeaderConnecting to the Audio System Ieee 1394a Header Signal NamesIeee 1394a Header Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Precaution Replacing the BatteryViktigt Προσοχή Upozornenie Intel Desktop Board DG45ID Product Guide Removing the Battery Intel Desktop Board DG45ID Product Guide Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the ISO Image Bios Update File Obtaining the Bios Update FileUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityRecovering the Bios Creating Your RAID Set Configuring the Bios for Intel Matrix Storage TechnologySetting Up a RAID Ready System Configuring for Intel Rapid Recover Technology Enabling Intel Rapid Recover TechnologyGo to Advanced Drive Configuration Creating a Recovery Volume Creating a Recovery Volume Using the RAID OptionSelect Protect data using Intel Rapid Recover Technology Disk Synchronization Mode Mounting the Recovery DiskConfiguring for Intel Rapid Recover Technology Select Access Recovery Drive Files Bios Error Messages Error Messages and IndicatorsBios Beep Codes Bios Error MessagesIntel Desktop Board DG45ID Product Guide Regulatory Compliance Safety StandardsPlace Battery Marking Safety StandardsEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Malay DeutschEspañol FrançaisPortuguese RussianTürkçe Lead-free 2LI/Pb-free 2LI Board Description Mark Restriction of Hazardous Substances RoHSEU RoHS Lead-Free Second Level Interconnect MarksChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DG45ID Product Guide

DG45ID specifications

The Intel DG45ID is a motherboard that showcases Intel's commitment to integrating advanced technologies for personal computing. Designed primarily for the Intel LGA 775 socket, this motherboard supports a range of Intel processors, including Core 2 Quad, Core 2 Duo, and Pentium D. It caters to users looking for a blend of performance and multimedia capabilities, making it suitable for both casual users and gamers.

One of the standout features of the DG45ID is its support for Intel's Desktop Board DQ45ID, which incorporates several cutting-edge technologies. The motherboard boasts an Intel Q45 Express chipset, ensuring optimized performance and efficient power management. With support for up to 8 GB of DDR2 800/667 MHz memory, the DG45ID handles multitasking and demanding applications with ease, allowing users to run multiple applications without significant slowdowns.

A significant characteristic of the DG45ID is its integrated Intel Graphics Media Accelerator 4500. This graphics solution offers decent performance for everyday tasks and casual gaming without the need for a dedicated graphics card. Users can benefit from features such as dual-display support and hardware acceleration for high-definition video playback, which enhances the overall multimedia experience.

The DG45ID also includes a range of connectivity options. Equipped with multiple USB ports, a Gigabit Ethernet LAN, and integrated audio featuring 5.1 surround sound, users can connect to a variety of devices and establish a comprehensive multimedia setup. The motherboard features SATA II connectors for speedy data transfer, supporting quick connections to hard drives and solid-state drives, ensuring efficient storage management.

For those who prioritize expandability, the DG45ID provides a PCI Express x16 slot for a dedicated graphics card, in addition to multiple PCI Express x1 and legacy PCI slots for additional expansion cards. This allows users to upgrade their systems over time, ensuring longevity and flexibility.

Finally, the DG45ID is designed with reliability in mind, featuring an array of safety and stability features, including advanced thermal management, which helps maintain optimal operating temperatures. Overall, the Intel DG45ID motherboard provides a robust platform for users seeking solid performance, versatile connectivity, and multimedia capabilities in a competitive computing environment. Its blend of technology and design makes it an excellent choice for a wide range of computing needs.
Top Page Image Contents