User’s Manual
| No |
| Label |
| Function |
| Description |
|
| 12 |
| 1394_USB12 |
| USB 2.0 connector |
| These two |
|
|
|
|
|
|
|
| ports are available for connecting USB 2.0 |
|
|
|
|
|
|
|
| devices. |
|
| 13 |
| VGA |
| VGA port |
| This |
|
|
|
|
|
|
|
|
| |
| 14 |
| ESATA |
| External SATA port |
| This port connects to an external Serial ATA |
|
|
|
|
|
|
|
| hard disk drive. To configure a RAID 0, a RAID |
|
|
|
|
|
|
|
| 1, or a JBOD set, install an external |
|
|
|
|
|
|
|
| Serial ATA hard disk drive and an internal |
|
|
|
|
|
|
|
| Serial ATA hard disk drive to the SATA |
|
|
|
|
|
|
|
| connector labelled SATA_RAID1. |
|
The external SATA port supports external Serial ATA 3.0 Gb/s devices. Longer cables support higher power requirements to deliver signal up to two meters away, and enables improved
zBefore creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cable and installed Serial ATA hard disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA BIOS setup during POST.
zIf you intend to create a RAID configuration using this connector, set the JMicron SATA Controller Mode item in the BIOS to [RAID].
zDO NOT insert a different connector to this port.
zDO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is configured.
15 KBMS | PS/2 KB connector | This port is for a PS/2 keyboard |
ATX Main board 39