ATX Main board
Production Introduction
1.1 Before you Proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
zUnplug the power cord from the wall socket before touching any component.
zUse a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity
zHold components by the edges to avoid touching the ICs on them.
zWhenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
zBefore you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.
Onboard LED
The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in
12