Onboard FDC Controller, Onboard Serial Port

Intel 945 Series	User's Manual

[Mouse Left]: Double click the mouse left button to power on the system.

[Mouse Right]: Double click the mouse right button to power on the system.

[Any KEY]: Use any keyboard keys to power on the system.

[Button Only]: Use only the power button to power on the system.

	[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to
	power on the system.

Onboard FDC Controller

This option enables or disables the onboard FDC controller.

Onboard Serial Port 1

This item determines which I/O addresses the onboard Serial Port controller will access.

[Auto]: The system automatically select an I/O address for the onboard Serial Port.

[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an

I/O address for the onboard Serial Port.

[Disabled]: Disables the onboard Serial Port.

Onboard Parallel Port

This item specifies the I/O address used by the parallel port.

[Disabled]: This option prevents the parallel port from accessing any system resources.

When the value of this option is set to [Disabled], the printer port becomes

unavailable.

[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port

address. The majority of parallel ports on computer systems use IRQ7

and I/O Port 378H as the standard setting.

[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port

address.

[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port

address.

Parallel Port Mode

This item specifies the parallel port mode.

[Normal]: Allow the standard parallel port mode to be used.

[SPP]: (Standard Parallel Port) Allow bi-directional parallel port operation at normal

speed.

[EPP]: (Enhanced Parallel Port) Allow bi-directional parallel port operation at maximum

speed.

[ECP]: (Extended Capabilities Port) Allow bi-directional parallel port operation at a

speed faster than the normal mode’s data transfer rate.

[ECP+EPP]: Allow parallel port operation at ECP and EPP mode.

EPP Mode Select

This item selects the EPP mode.

ECP Mode Use DMA

This item selects the DMA channel of the parallel port.

PWRON after PWR-Fail

This item enables your computer to automatically restart or return to its last operating

status after power returns from a power failure.

• Back to Integrated Peripherals Setup Menu

・KB Power ON Password

If you select [Password],this function will be activation.

Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.

・Hot Key Power ON

If you select [Hot Key], this function will be activation. Available options: Ctr-F1~F12

- 29 -