Intel SBC-370 manual AMI Bios Setup Menus

Page 33

Serial Port B Mode >: Specify the mode of serial port 2.

IR Duplex Mode >: Specify the mode of IR device that is connected to the IR port.

IrDA Protocol >: Specify the function mode if an IrDA mode is selected.

Onboard Parallel Port >: Specify the I/O port address of the parallel port.

Parallel Port Mode >: Used to specify the mode of parallel port. The options are:

•Normal (normal parallel port mode)

•Bi-Dir(supports bidirectional transfer)

•EPP (supports devices that comply with the Enhanced Parallel Port specification)

•ECP (supports devices that comply with the Extended Capabilities Port)

Parallel Port IRQ >: This option is used to assign certain IRQ to the parallel port. The opti- mal and fail-safe setting is 7.

Parallel Port DMA Channel >: This function is available only if the parallel port mode is ECP. The optimal and fail-safe setting is 3.

Onboard IDE >: Define which onboard IDE controller channel(s) should be used. Avail-

able options are: Primary, Secondary, Both, and Disabled.

35	AMI BIOS Setup Menus

Image 33

Contents Socket 370 CELERON, Pentium SBC-370Battery Replacement Caution Table of Contents AMI Bios Setup Menus Overview Feature ListEthernet Controller AGP VGA ControllerUltra DMA/33 Enhanced PCI EDI Interface Multi-I/O ChipATX Power Supply Function Watchdog TimerPower Consumption Hardware Monitoring SystemWatchdog Timer Operating HumidityE2KEY Function SBC-370 through Power Button and +5VSB Connecting to AN ATX Power SupplyBoard Layout Board ConfigurationCPU Multiplier Setting JP8 CPU Frequency Setting JP3Watchdog Timer Type Setting JP5 JumpersWatchdog Timeout Period JP12 DiskOnChip Memory Address Setting JP11Clear Cmos Setup JP4 PS/2 Mouse Setting JP7 Floppy Disk Drive Connector CN2 ConnectorsPCI E-IDE Disk Drive Connector CN1/CN3 Parallel Port CN4 Serial Ports CN12/CN11 CN11 Serial Port 2x5 pin header Connector COM2Keyboard/Mouse Connector CN8/CN17/CN18 USB Port Connector CN9 External Switches and Indicators CN7IrDA Infrared Interface Port CN6 VGA Connector J1LAN RJ45 Connector CN10 LED Connector for LAN CN5Fan Connector CN13/CN14/CN15 DMA Channel Assignments System Interrupts IrqsMAP 1ST MB Memory Address MAPGetting Started Standard Cmos SetupAdvanced Cmos Setup AMI Bios Setup Menus AMI Bios Setup Menus Advanced Chipset Setup AMI Bios Setup Menus Power Management Setup PCI/PLUG and Play Setup Peripheral Setup AMI Bios Setup Menus Hardware Monitor Setup AUTO-DETECT Hard Disk Change SUPERVISOR/USER PasswordAuto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and ExitExit Without Saving Index Page 139908D Xycom Automation, Inc Canada Sales Fax