Floppy Drive Swap >: This function enables you to swap the floppy disk drives through software without moving the hardware.
Floppy Drive Seek >: When this option is Enabled, the BIOS will perform a Seek command
on floppy drive A: before
PS/2 Mouse Support >: This is used to determine whether or not a PS/2 mouse is supported.
System Keyboard >: Configures the keyboard. If you set it to Absent, the BIOS will not re- port keyboard errors.
Primary Display >: Used to define the type of display monitor for the system. The Absent option is for network file servers.
Password Check >: Used to define whether or not a password is necessary for access to the BIOS setup.
Boot to OS/2 >: If you run the OS/2 operating system, this option must be set to Yes, per- mitting the BIOS to run properly if OS/2 or any other OS that does not support Plug and Play is found in your computer.
CPU Serial Number> : This option is available only if you use a Pentium® III processor.
Cache Bus ECC >: This option is available only if you use a Pentium® III processor.
System BIOS Cacheable >: Used to define whether or not the memory segment FOOOH can be read from or written to cache memory. Setting it to Enabled will provide faster execu- tion in your system.
XXXX, 16k Shadow >: ROM Shadow is a technique in which BIOS code is copied from slower ROM to faster RAM. If you enable it, the BIOS will be executed from the RAM. Each option allows 16 K segment to be shadowed to the RAM.
29 | AMI BIOS Setup Menus |