Installing Hardware, CPU Socket | Intel I-45CV manual

1.6 Installing Hardware

※DO NOT scratch the motherboard when installing hardware. An accidental scratch of a tiny surface-mount component may seriously damage the motherboard.

※In order to protect the contact pins, please pay attention to these notices:

1.A maximum 20 cycles of CPU installation is recommended.

2.Never touch the contact pins with fingers or any object.

3.Always put on the cap when the CPU is not in use.

1.6.1 CPU Socket 775

※The installation procedures vary with different types of CPU fan-and-heatsink assembly. The one shown here is served for demo only. For detailed information on how to install the one you bought, refer to its installation guidelines.

※Clear the CMOS memory after replacing CPU.

1.Place the board so that the lever-hook of the socket is on your left side. Use your left thumb and forefinger to hold the lever hook, pull it away from the retention tab. Rotate the lever to fully open position.

2.Use your right-thumb to raise the load plate. Lift it up to fully open position.

3.Use your right thumb and forefinger to grasp the CPU package. Be sure to grasp on the edge of the substrate, and face the Pin-1 indicator toward the bottom-left side. Aim at the socket and place the CPU package vertical down into the socket.

4.Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package.

6	I-45C/I-45CV

I-45C, I-45CV specifications

The Intel I-45C and I-45CV are innovative processors designed to cater to the demands of modern computing environments. These chips are an evolution within Intel's extensive lineup, aimed at enhancing performance while maintaining energy efficiency. Built on advanced fabrication processes, the I-45C and I-45CV models integrate powerful functionalities suited for a wide range of applications, from consumer desktops to enterprise-grade solutions.

One of the defining features of the I-45C is its multi-core architecture, which allows it to handle multiple tasks simultaneously without compromising performance. This is particularly advantageous for users who engage in demanding applications such as video editing, 3D rendering, and gaming. The I-45CV variant extends these capabilities with integrated graphics, offering seamless visuals and improved gaming performance without necessitating a dedicated graphics card.

In terms of technologies, both models utilize Intel’s Hyper-Threading technology, which effectively doubles the number of threads available to the CPU. This feature is critical for optimizing resource allocation and improving multitasking capabilities. The processors also support Intel Turbo Boost technology, which allows the CPU to dynamically adjust its speed according to workload demands. This results in enhanced responsiveness during high-performance tasks while conserving energy during lighter activities.

Another significant characteristic of the I-45C and I-45CV is their compatibility with Intel’s Smart Cache, enabling faster data access and reduced latency. This system ensures that frequently accessed data is readily available to the cores, facilitating smooth operation for memory-intensive applications.

Moreover, both processors are designed with advanced thermal management features that maintain optimal operating temperatures, ensuring reliability and longevity. They also support Intel's security technologies, providing built-in protection against various threats, which is essential for both personal users and businesses handling sensitive information.

In summary, the Intel I-45C and I-45CV processors stand out for their robust multi-core capabilities, energy-efficient architecture, and advanced technological features. They cater to a diverse array of computing needs, combining performance and efficiency for an enhanced user experience across different applications. With their commitment to innovation, Intel continues to meet the evolving demands of consumers and professionals alike.