Intel I-45CV manual Checking Jumper Settings, Cmos Memory Clearing Header and Backup Battery

Page 7

1.4 Checking Jumper Settings

For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position.

SHORT

OPEN

OPEN

For a 3-pin jumper, pin 1~2 or pin 2~3 can be shorted by plugging the jumper cap in.

Pin 1~2 SHORT

Pin 2~3 SHORT

1.4.1CMOS Memory Clearing Header and Backup Battery

The time to clear the CMOS memory occurs when (a) the CMOS data becomes corrupted, (b) you forgot the supervisor or user password preset in the BIOS menu, (c) you are unable to boot-up the system because the CPU ratio/clock was incorrectly set in the BIOS menu, or (d) whenever there is modification on the CPU or memory modules.

This header uses a jumper cap to clear the CMOS memory and have it reconfigured to the default values stored in BIOS.

Pin-1 and pin-2 shorted (Default): Normal operation.

Pin-2 and pin-3 shorted: Clear CMOS memory.

To clear the CMOS memory and load in the default values:

1.Power off the system.

2.Set pin-2 and pin-3 shorted by the jumper cap. Wait for a few seconds. Set the jumper cap back to its default settings --- pin-1 and pin-2 shorted.

3.Power on the system.

4.For incorrect CPU ratio/clock settings in the BIOS, press <Del> key to enter the BIOS setup menu right after powering on system.

5.Set the CPU operating speed back to its default or an appropriate value.

6.Save and exit the BIOS setup menu.

CMOS Backup Battery:

An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “CMOS BATTERY HAS FAILED

I-45C/I-45CV

3

Image 7
Contents 45C I-45CV Installation GuideCopyright and Warranty Notice 45C/I-45CV Iii 环保使用期限标识说明Contents 45C/I-45CV Hardware Setup 1.1 SpecificationsThis side faces Chassis’s rear Panel Installing MotherboardTo install this motherboard Choosing a Computer ChassisCmos Memory Clearing Header and Backup Battery Checking Jumper SettingsCmos Backup Battery ATX 24-Pin Power Connector Connecting Chassis ComponentsATX Power Connectors To renew the backup batteryFAN Power Connectors Front Panel Switches and Indicators HeadersCPU Socket Installing Hardware45C/I-45CV 2 DDR2 Memory Slots To install system memoryTo connect Sata device Connecting Peripheral DevicesFloppy and IDE Disk Drive Connectors Serial ATA ConnectorsAdditional USB 2.0 Port Headers Internal Audio ConnectorsPin Pin Assignment Front Panel Audio Connection Header Driver Configuration for AC’97 audio connectionPCI and PCI Express X16, X1 Slots Connecting Rear Panel I/O DevicesPress DEL to Enter Setup Bios SetupDriver & Utility 45C 內建 GbE LAN Appendix45C 内建 GbE LAN 规格(简体中文)1 Q & a Troubleshooting How to Get Technical Support?Technical Support Form Contact Information Rev

I-45C, I-45CV specifications

The Intel I-45C and I-45CV are innovative processors designed to cater to the demands of modern computing environments. These chips are an evolution within Intel's extensive lineup, aimed at enhancing performance while maintaining energy efficiency. Built on advanced fabrication processes, the I-45C and I-45CV models integrate powerful functionalities suited for a wide range of applications, from consumer desktops to enterprise-grade solutions.

One of the defining features of the I-45C is its multi-core architecture, which allows it to handle multiple tasks simultaneously without compromising performance. This is particularly advantageous for users who engage in demanding applications such as video editing, 3D rendering, and gaming. The I-45CV variant extends these capabilities with integrated graphics, offering seamless visuals and improved gaming performance without necessitating a dedicated graphics card.

In terms of technologies, both models utilize Intel’s Hyper-Threading technology, which effectively doubles the number of threads available to the CPU. This feature is critical for optimizing resource allocation and improving multitasking capabilities. The processors also support Intel Turbo Boost technology, which allows the CPU to dynamically adjust its speed according to workload demands. This results in enhanced responsiveness during high-performance tasks while conserving energy during lighter activities.

Another significant characteristic of the I-45C and I-45CV is their compatibility with Intel’s Smart Cache, enabling faster data access and reduced latency. This system ensures that frequently accessed data is readily available to the cores, facilitating smooth operation for memory-intensive applications.

Moreover, both processors are designed with advanced thermal management features that maintain optimal operating temperatures, ensuring reliability and longevity. They also support Intel's security technologies, providing built-in protection against various threats, which is essential for both personal users and businesses handling sensitive information.

In summary, the Intel I-45C and I-45CV processors stand out for their robust multi-core capabilities, energy-efficient architecture, and advanced technological features. They cater to a diverse array of computing needs, combining performance and efficiency for an enhanced user experience across different applications. With their commitment to innovation, Intel continues to meet the evolving demands of consumers and professionals alike.