Choosing a Computer Chassis, Installing Motherboard

1.2 Choosing a Computer Chassis

•Choose a chassis big enough to install this motherboard.

•As some features for this motherboard are implemented by cabling connectors on the motherboard to indicators and switches or buttons on the chassis, make sure your chassis supports all the features required.

•If there is a possibility of adopting some more hard drives, make sure your chassis has sufficient power and space for them.

•Most chassis have alternatives for I/O shield located at the rear panel. Make sure the I/O shield of the chassis matches the I/O port configuration of this motherboard. You can find an I/O shield specifically designed for this motherboard in its package.

1.3 Installing Motherboard

Most computer chassis have a base with many mounting holes to allow the motherboard to be securely attached, and at the same time, prevent the system from short circuits. There are two ways to attach the motherboard to the chassis base: (1) with studs, or (2) with spacers.

Basically, the best way to attach the board is with studs. Only if you are unable to do this should you attach the board with spacers. Line up the holes on the board with the mounting holes on the chassis. If the holes line up and there are screw holes, you can attach the board with studs. If the holes line up and there are only slots, you can only attach with spacers. Take the tip of the spacers and insert them into the slots. After doing this to all the slots, you can slide the board into position aligned

with slots. After the board has been positioned, check to make sure everything is OK before putting the chassis back on.

※Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. Failing to so may cause severe damage to your motherboard and/or peripherals. Plug in the AC power cord only after you have carefully checked everything.

To install this motherboard:

1.Locate all the screw holes on the motherboard and the chassis base.

2.Place all the studs or spacers needed on the chassis base and have them tightened.

3.Face the motherboard’s I/O ports toward the chassis’s rear panel.

4.Line up all the motherboard’s screw holes with those studs or spacers on the chassis.

5.Install the motherboard with screws and have them tightened.

※To prevent shorting the PCB circuit, please REMOVE the metal studs or spacers if they are already fastened on the chassis base and are without mounting-holes on the motherboard to align with.

This side faces

the chassis’s rear

panel.

2	I-45C/I-45CV

I-45C, I-45CV specifications

The Intel I-45C and I-45CV are innovative processors designed to cater to the demands of modern computing environments. These chips are an evolution within Intel's extensive lineup, aimed at enhancing performance while maintaining energy efficiency. Built on advanced fabrication processes, the I-45C and I-45CV models integrate powerful functionalities suited for a wide range of applications, from consumer desktops to enterprise-grade solutions.

One of the defining features of the I-45C is its multi-core architecture, which allows it to handle multiple tasks simultaneously without compromising performance. This is particularly advantageous for users who engage in demanding applications such as video editing, 3D rendering, and gaming. The I-45CV variant extends these capabilities with integrated graphics, offering seamless visuals and improved gaming performance without necessitating a dedicated graphics card.

In terms of technologies, both models utilize Intel’s Hyper-Threading technology, which effectively doubles the number of threads available to the CPU. This feature is critical for optimizing resource allocation and improving multitasking capabilities. The processors also support Intel Turbo Boost technology, which allows the CPU to dynamically adjust its speed according to workload demands. This results in enhanced responsiveness during high-performance tasks while conserving energy during lighter activities.

Another significant characteristic of the I-45C and I-45CV is their compatibility with Intel’s Smart Cache, enabling faster data access and reduced latency. This system ensures that frequently accessed data is readily available to the cores, facilitating smooth operation for memory-intensive applications.

Moreover, both processors are designed with advanced thermal management features that maintain optimal operating temperatures, ensuring reliability and longevity. They also support Intel's security technologies, providing built-in protection against various threats, which is essential for both personal users and businesses handling sensitive information.

In summary, the Intel I-45C and I-45CV processors stand out for their robust multi-core capabilities, energy-efficient architecture, and advanced technological features. They cater to a diverse array of computing needs, combining performance and efficiency for an enhanced user experience across different applications. With their commitment to innovation, Intel continues to meet the evolving demands of consumers and professionals alike.