MB Intelligent Tweaker(M.I.T.) |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| MB Intelligent Tweaker(M.I.T.) |
|
| |
` | System Clock Setting | [Press Enter] |
|
| Item Help | |
| CPU Clock Ratio (Note) | [16X] |
| Menu Level` | ||
| ******** | System Voltage Optimized ******** |
|
|
| |
| System Voltage Control | [Manual] |
|
|
| |
| DDR2 Voltage Control | [Normal] |
|
|
| |
| [Normal] |
|
|
| ||
| FSB Voltage | [Normal] |
|
|
| |
| South Bridge Voltage | [Normal] |
|
|
| |
| VCC12_DL Voltage | [Normal] |
|
|
| |
| CPU Voltage Control | [Normal] |
|
|
| |
| Normal CPU Vcore | 1.40000V |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
•Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
•When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings.
System Clock Setting
CMOS Setup
System Clock Setting
| [Auto] |
|
| Item Help | ||
x | Auto |
| Menu Level` | |||
x CPU Host Frequency (Mhz) | Auto | 133.3 |
|
| ||
| Actual CPU Clock (Mhz) | 133.3 |
|
|
| |
x | Memory Frequency (Mhz) | Auto | 800.0 |
|
| |
| Actual Memory Clock (Mhz) | 800.0 |
|
|
| |
| PCIe Bus, Slot 1, MHz | [100] |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults |
(Note) This item is present only if you install a CPU that supports this feature.
- 52 - |