Intel GA-N650SLI-DS4L user manual Nvidia

After that, the Array List screen appears, displaying the RAID array that you have created (Figure 7).

MediaShield Utility June 1 2006

- Array List -

Boot	Status		Vendor	Array Model Name
No	Healthy		NVIDIA	STRIPE 223.57G
[Ctrl-X] Exit	[KL] Select	[B] Set Boot		[N] New Array [ENTER] Detail

Figure 7

To read more information about the RAID array, press <Enter> to enter the Array Detail screen (Figure 8), which shows various information about the array, including the RAID mode, stripe block size, hard drive model name, and hard drive capacity, etc.

		Array 2: NVIDIA STRIPE 233.57G
		- Array Detail -
RAID Mode: Striping
Striping Width : 2			Striping Block: 64K
Port	Index	Disk Model	Capacity
1.0	0	ST3120026AS	111.79GB
1.1	1	ST3120026AS	111.79GB
	[R] Rebuild	[D] Delete	[C] Clear Disk [ENTER] Return

Figure 8

To delete the array, press <D> in the Array Detail screen. When the "Delete this array?" message appears, press <Y> to confirm or <N> to cancel. Press <Enter> to return to the Array List screen.

To exit the NVIDIA RAID setup utility, press <Esc> in the main menu or <Ctrl>+<X> in the Array List screen.

Now, you can proceed to the installation of the SATA controller driver and operating system.

- 79 - Appendix