Intel GA-945P-DS3/S3 user manual Power Management Setup, ECP Mode Use DMA

ECP Mode Use DMA

This option is available only when Parallel Port Mode is set to ECP or ECP+EPP.

3	Set ECP Mode Use DMA to 3. (Default value)
1	Set ECP Mode Use DMA to 1.

2-4	Power Management Setup
		CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
			Power Management Setup
	ACPI Suspend Type		[S1(POS)]		Item Help
	Soft-Off by PWR-BTTN		[Instant-Off]		Menu Level`
	PME Event Wake Up		[Enabled]
	Power On by Ring		[Enabled]
	Resume by Alarm		[Disabled]
x	Date (of Month) Alarm		Everyday
x	Time (hh:mm:ss) Alarm		0 : 0 : 0
	Power On By Mouse		[Disabled]
	Power On By Keyboard		[Disabled]
x KB Power ON Password			Enter
	AC Back Function		[Soft-Off]
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults
	ACPI Suspend Type
	S1(POS)		Set ACPI suspend type to S1/POS(Power On Suspend). (Default
			value)
	S3(STR)		Set ACPI suspend type to S3/STR(Suspend To RAM).
	Soft-Off by PWR-BTTN
	Instant-Off		Press power button then Power off instantly. (Default value)
	Delay 4 Sec.		Press power button 4 sec. to Power off. Enter suspend if button is
			pressed less than 4 sec.
	PME Event Wake Up
	This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
	Disabled		Disable this function.
	Enabled		Enable PME as wake up event. (Default value)
	Power On by Ring
	Disabled		Disable Power on by Ring function.
	Enabled		Enable Power on by Ring function. (Default value)
	Resume by Alarm
	You can set "Resume by Alarm" item to Enabled and key in Date/time to power on system.
	Disabled		Disable this function. (Default value)
	Enabled		Enable alarm function to POWER ON system.
			- 39 -			BIOS Setup

English