Intel 4127 Onboard LAN Boot ROM, Onboard Serial Port, Onboard Parallel Port, Parallel Port Mode

Page 42

Onboard LAN Boot ROM

Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled)

Onboard Serial Port 1

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.

Onboard Parallel Port

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.

ECP Mode Use DMA

Selects DMA channel for the LPT port in ECP mode. This item is configurable only if Parallel Port Mode is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.

GA-945GCM-S2L/S2C Motherboard

- 42 -

Image 42

Contents GA-945GCM-S2L/ GA-945GCM-S2C Motherboard Documentation Classifications CopyrightDisclaimer Identifying Your Motherboard RevisionTable of Contents Regulatory Statements Box Contents GA-945GCM-S2L/GA-945GCM-S2C Motherboard Layout Block Diagram Hardware Installation Installation PrecautionsProduct Specifications CPU4 Mbit flash Page Installing the CPU and CPU Cooler Installing the CPUCPU Socket Lever Installing the CPU Cooler Installing the Memory Dual Channel Memory ConfigurationInstalling a Memory Installing an Expansion Card Back Panel Connectors Line In Jack Blue Line Out Jack GreenMic In Jack Pink Internal Connectors PwrledGND FDD Floppy Disk Drive Connector CPUFAN/SYSFAN Fan HeadersIDE IDE Connector SATAII0/1/2/3 Sata 3Gb/s Connectors, Controlled by ICH7Pwrled System Power LED Header BatbatteryFpanel Front Panel Header Cdin CD In Connector Faudio Front Panel Audio HeaderSpdifo S/PDIF Out Header FUSB1/FUSB2 USB HeadersClrcmos Clearing Cmos Jumper CI Chassis Intrusion HeaderGA-945GCM-S2L/S2C Motherboard Bios Setup Following screen may appear when the computer boots Startup ScreenSample Bios Version GA-945GCM-S2L E10 Bios Setup Program Function KeysMain Menu „ Power Management Setup „ Standard Cmos Features„ Advanced Bios Features „ PnP/PCI ConfigurationsIDE Channel 0 Master/Slave DateTime IDE Channel 2, 3 Master/SlaveHalt on Floppy 3 Mode SupportDrive a MemoryPassword Check Hard Disk Boot PriorityFirst/Second/Third Boot Device HDD S.M.A.R.T. CapabilityCPU Enhanced Halt C1ENote Limit Cpuid Max. to 3 NoteNo-Execute Memory Protect Note CPU Thermal Monitor 2 TM2 NotePata IDE Set to On-Chip Sata ModeOn-Chip Primary PCI IDE Sata Port 0/2 Set toUSB 2.0 Controller Sata Port 1/3 Set toUSB Controller USB Keyboard SupportSmart LAN LAN Cable Diagnostic Function Smart LANECP Mode Use DMA Onboard LAN Boot ROMParallel Port Mode Onboard Serial PortPower On by Ring Soft-Off by PWR-BTTNPME Event Wake Up Power On By Mouse Resume by AlarmHpet Mode Note Power On By KeyboardPnP/PCI Configurations PCI1 IRQ AssignmentPCI2 IRQ Assignment CPU Warning Temperature Reset Case Open StatusCurrent CPU Temperature Case OpenedCPU Smart FAN Control CPU Clock Ratio Note FSB1333 Core 2 CPUCPU Host Clock Control System Memory Multiplier CPU Host Frequency MhzPCI Express Frequency Mhz Memory Frequency MhzLoad Fail-Safe Defaults Load Optimized DefaultsSet Supervisor/User Password Save & Exit Setup Exit Without SavingDrivers Installation Installing Chipset DriversSoftware Applications Driver CD InformationHardware Information Contact UsGA-945GCM-S2L/S2C Motherboard Xpress Recovery2 Before You BeginSystem Requirements Installation and Configuration Installing Windows XP and Partitioning the Hard DrivePage Accessing Xpress Recovery2 Using the Backup Function in Xpress Recovery2Using the Restore Function in Xpress Recovery2 Removing the BackupExiting Xpress Recovery2 Bios Update Utilities Updating the Bios with the Q-Flash UtilityUpdating the Bios Press Y to load Bios defaults Updating the Bios with the @BIOS Utility Installing and Using @BIOSOptions and Instructions Update the Bios without Using the Internet Update Function EasyTune EasyTune 5 Interface Button Information TableWindows Vista ReadyBoost Configuring Audio Input and Output Configuring 2/4/5.1-Channel AudioConfiguring Speakers Speakers or Headphones Configuring Sound Effect Activating an AC97 Front Panel Audio ModuleMuting the Back Panel Audio For HD Audio Only Installing the S/PDIFOut Cable Optional Installing the S/PDIF Out CablePdif out Configuring S/PDIF out Configuring Microphone Recording Appendix Using the Sound Recorder Recording the SoundPlaying the Sound Troubleshooting Frequently Asked QuestionsTroubleshooting Procedure StartEND Weee Symbol Statement Regulatory NoticesOur Commitment to Preserving the Environment China Restriction of Hazardous Substances Table GA-945GCM-S2L/S2C Motherboard Contact Us B.T. INC USA MexicoGigabyte Global Service System