Intel 4112, 4127 user manual End

Page 79

A

When the computer is turned on, is the CPU cooler running?

 

No

 

The power supply,

 

 

CPU or CPU socket

 

 

 

 

 

 

 

might fail.

Yes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The problem is verified and solved.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No

The graphics card,

Check if there is display on your monitor.

 

expansion slot, or

 

 

 

 

 

 

 

monitor might fail.

Yes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

solved.

 

 

 

 

 

 

 

 

 

 

The problem is verified and

 

 

 

 

Turn off the computer. Plugg in the keyboard and mouse and restart the computer.

Check if the keyboard is working properly.

No

 

The keyboard or mouse might fail.

Yes

Press <Delete> to enter BIOS Setup. Select "Load Fail-Safe Defaults" (or "Load Optimized Defaults"). Select "Save & Exit Setup" to save changes and exit BIOS Setup.

Turn off the computer and connect the IDE/SATA devices. Check if the system can boot successfully.

Yes

The problem is verified and solved.

No

 

T h e I D E / S A T A

 

device, connector,

 

 

or cable might fail.

 

 

 

Reinstall the operating system. Reinstall other devices one by one (install one device at one time and then boot the system to see if the device works successfully).

The problem is verified and solved.

END

If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support\Technical Service Zone page to submit your question. Our customer service staff will reply you as soon as possible.

- 79 -

Appendix

Image 79
Contents GA-945GCM-S2L/ GA-945GCM-S2C Motherboard Identifying Your Motherboard Revision CopyrightDisclaimer Documentation ClassificationsTable of Contents Regulatory Statements Box Contents GA-945GCM-S2L/GA-945GCM-S2C Motherboard Layout Block Diagram Installation Precautions Hardware InstallationCPU Product Specifications4 Mbit flash Page Installing the CPU Installing the CPU and CPU CoolerCPU Socket Lever Installing the CPU Cooler Dual Channel Memory Configuration Installing the MemoryInstalling a Memory Installing an Expansion Card Back Panel Connectors Line Out Jack Green Line In Jack BlueMic In Jack Pink Pwrled Internal ConnectorsGND CPUFAN/SYSFAN Fan Headers FDD Floppy Disk Drive ConnectorSATAII0/1/2/3 Sata 3Gb/s Connectors, Controlled by ICH7 IDE IDE ConnectorBatbattery Pwrled System Power LED HeaderFpanel Front Panel Header Faudio Front Panel Audio Header Cdin CD In ConnectorFUSB1/FUSB2 USB Headers Spdifo S/PDIF Out HeaderCI Chassis Intrusion Header Clrcmos Clearing Cmos JumperGA-945GCM-S2L/S2C Motherboard Bios Setup Startup Screen Following screen may appear when the computer bootsBios Setup Program Function Keys Sample Bios Version GA-945GCM-S2L E10Main Menu „ PnP/PCI Configurations „ Standard Cmos Features„ Advanced Bios Features „ Power Management SetupIDE Channel 2, 3 Master/Slave DateTime IDE Channel 0 Master/SlaveMemory Floppy 3 Mode SupportDrive a Halt onHDD S.M.A.R.T. Capability Hard Disk Boot PriorityFirst/Second/Third Boot Device Password CheckCPU Thermal Monitor 2 TM2 Note Limit Cpuid Max. to 3 NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1ENoteSata Port 0/2 Set to On-Chip Sata ModeOn-Chip Primary PCI IDE Pata IDE Set toUSB Keyboard Support Sata Port 1/3 Set toUSB Controller USB 2.0 ControllerSmart LAN Smart LAN LAN Cable Diagnostic FunctionOnboard Serial Port Onboard LAN Boot ROMParallel Port Mode ECP Mode Use DMASoft-Off by PWR-BTTN Power On by RingPME Event Wake Up Power On By Keyboard Resume by AlarmHpet Mode Note Power On By MousePCI1 IRQ Assignment PnP/PCI ConfigurationsPCI2 IRQ Assignment Case Opened Reset Case Open StatusCurrent CPU Temperature CPU Warning TemperatureCPU Smart FAN Control FSB1333 Core 2 CPU CPU Clock Ratio NoteCPU Host Clock Control Memory Frequency Mhz CPU Host Frequency MhzPCI Express Frequency Mhz System Memory MultiplierLoad Optimized Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Exit Without Saving Save & Exit SetupInstalling Chipset Drivers Drivers InstallationDriver CD Information Software ApplicationsContact Us Hardware InformationGA-945GCM-S2L/S2C Motherboard Before You Begin Xpress Recovery2System Requirements Installing Windows XP and Partitioning the Hard Drive Installation and ConfigurationPage Using the Backup Function in Xpress Recovery2 Accessing Xpress Recovery2Removing the Backup Using the Restore Function in Xpress Recovery2Exiting Xpress Recovery2 Updating the Bios with the Q-Flash Utility Bios Update UtilitiesUpdating the Bios Press Y to load Bios defaults Installing and Using @BIOS Updating the Bios with the @BIOS UtilityOptions and Instructions Update the Bios without Using the Internet Update Function EasyTune 5 Interface Button Information Table EasyTuneWindows Vista ReadyBoost Configuring 2/4/5.1-Channel Audio Configuring Audio Input and OutputConfiguring Speakers Speakers or Headphones Activating an AC97 Front Panel Audio Module Configuring Sound EffectMuting the Back Panel Audio For HD Audio Only Installing the S/PDIF Out Cable Installing the S/PDIFOut Cable OptionalPdif out Configuring S/PDIF out Configuring Microphone Recording Appendix Recording the Sound Using the Sound RecorderPlaying the Sound Frequently Asked Questions TroubleshootingStart Troubleshooting ProcedureEND Regulatory Notices Weee Symbol StatementOur Commitment to Preserving the Environment China Restriction of Hazardous Substances Table GA-945GCM-S2L/S2C Motherboard B.T. INC USA Mexico Contact UsGigabyte Global Service System