Intel 4127, 4112 user manual CPU Clock Ratio Note, FSB1333 Core 2 CPU, CPU Host Clock Control

2-9	Frequency/Voltage Control
		CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
			Frequency/Voltage Control
	CPU Clock Ratio (Note)		[18X]			Item Help
	O.C FSB1333 Core. 2 CPU		[Auto]		Menu Level`
	CPU Host Clock Control		[Disabled]
x	CPU Host Frequency(Mhz)		200
	PCI Express Frequency (Mhz)		[Auto]
	System Memory Multiplier		[Auto]
	Memory Frequency (Mhz)		533
	DIMM OverVoltage Control		[Normal]
	FSB OverVoltage Control		[Normal]
	CPU Voltage Control		[Normal]
	Normal CPU Vcore		1.38750V
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

CPU Clock Ratio (Note)

Allows you to alter the clock ratio for the installed CPU.

The item is present only if a CPU with unlocked clock ratio is installed.

O.C FSB1333 Core 2 CPU

Enable use of a CoreTM 2 CPU with 1333 MHz FSB through overclocking. You must install the FSB 1333 MHz CoreTM 2 CPU with DDR2 533 (or above) memory module(s).

Auto	Set this item to Auto. Then save the changes and restart your computer.
	During the POST, a message will appear asking if you want to enable the use
	of a FSB 1333 CoreTM 2 processor. Press <Y> to confirm or <N> to reject. Or
	press any key to continue the POST. (Default value)
Disabled	Disable this function.
Enabled	Enable this function.

CPU Host Clock Control

Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled)

(Note) This item appears only if you install a CPU that supports this feature.

GA-945GCM-S2L/S2C Motherboard - 48 -