Hardware Installation
Figure 2-1. IIR Controller Component Layout
| 167mm (6.57 inches) |
|
| I/O Processor | |
DS2A1 | ||
|
| SDRAM |
56mm (2.20 inches)
J1B1
Flash Memory
64Bit PCI Interface
(Requires a
2.2.2Installing the IIR Controller
1.
2.Disconnect power cord(s) and remove the system cover.
3.Install the IIR controller into an available
Note: The computer system (with
4.Connect one end of the SCSI cable to the
Note: Ensure that the end of the SCSI bus is properly terminated. See Section 2.4 in this guide for termination details.
5. Replace the system cover and reconnect power cord(s).
14 | Hardware Installation and User’s Guide |