Intel 3U Compact PCI, MIC-3321 user manual Specifications, Standard SBC Functions, System Memory

1.2 Specifications

1.2.1 Standard SBC Functions

•CPU: MIC-3321 supports Intel Pentium M 2.0 GHz

•Optional: Celeron M 1.0GHz/ Celeron M 800MHz (non cache)

•BIOS: Award 4 Mb flash memory

•Chipset: Intel 915GM Graphics and Memory Controller Hub (GMCH) Intel 82801FBM I/O Controller Hub (ICH6M)

•System Memory:

Directed Soldered 512MB DDR2 533 SDRAM (MIC-3321/3321S) Directed Soldered 512MB DDR2 400 SDRAM (MIC-3321C/3321CS) Directed Soldered 256MB DDR2 400 SDRAM (MIC-3321LS) Max:1GB

•P-IDE:One Channel IDE CompactFlash socket type II*1(select mas- ter/slave DIP-SW), UltraDMA/100/66/33*a (2.5"HDD)

•SATA: One external SATA Connector

•Serial Ports: Two RS-232 ports with 16C550UARTs (or compatible) with 16-byte FIFO buffer. One Front I/O, the other Rear I/O.

•Keyboard and PS/2 Mouse Connector: One 6-pinmini-DIN connec- tor is located on the mounting bracket for easy connection to a key- board or PS/2 mouse.

•USB Port: Four USB2.0 Channels up to 480MB, 2 front I/O, 2 rear I/O

•PCI-to-PCI Bridge: PERICOM P17C8150-32-bit/33MHz Compact- PCI interface

•Watchdog Timer: Provides system reset and software control. Time interval is programmable from 1 to 255 seconds/minutes.

•Ethernet LAN: 10/100/1000Base-TX Gigabit Ethernet

•Controller Chips: Two Intel 825723E/L PCI Express Gigabit Ethernet Controllers support Pre-boot Execution Environment(PXE).

•Battery-backup RAM: 512 KB

•Input /Output Bus Interface: PCI 2.2 compliant, 32 bit/33 MHz

•CompactPCI Compliance: PICMG 2.1 CompactPCI Hot Swap R3.0

3 Chapter1