Intel 8 LAN manual NVM Information Guide-ICH8

Page 20
Manual background

NVM Information Guide—ICH8

Table 19. Boot Agent Configuration Customization Options (Word 31h)

Bit

Name

Description

 

 

 

15:14

SIG

Signature. These bits must be set to 01b to indicate that this word has

been programmed by the agent or other configuration software.

 

 

 

 

 

13:11

Reserved

Reserved for future use. All bits must be set to 0b.

 

 

 

 

 

Selects the agent's boot order setup mode. This field changes the

 

 

agent's default behavior in order to make it compatible with systems

 

 

that do not completely support the BBS and PnP Expansion ROM

 

 

standards. Valid values and their meanings are:

 

 

000b = Normal behavior. The agent attempts to detect BBS and PnP

 

 

Expansion ROM support as it normally does.

 

 

001b = Force Legacy mode. The agent does not attempt to detect BBS

 

 

or PnP Expansion ROM supports in the BIOS and assumes the BIOS is

 

 

not compliant. The BIOS boot order can be changed in the Setup Menu.

 

 

010b = Force BBS mode. The agent assumes the BIOS is BBS-

 

 

compliant, even though it may not be detected as such by the agent's

 

 

detection code. The BIOS boot order CANNOT be changed in the Setup

10:8

MODE

Menu.

011b = Force PnP Int18 mode. The agent assumes the BIOS allows

 

 

 

 

boot order setup for PnP Expansion ROMs and hooks interrupt 18h (to

 

 

inform the BIOS that the agent is a bootable device) in addition to

 

 

registering as a BBS IPL device. The BIOS boot order CANNOT be

 

 

changed in the Setup Menu.

 

 

100b = Force PnP Int19 mode. The agent assumes the BIOS allows

 

 

boot order setup for PnP Expansion ROMs and hooks interrupt 19h (to

 

 

inform the BIOS that the agent is a bootable device) in addition to

 

 

registering as a BBS IPL device. The BIOS boot order CANNOT be

 

 

changed in the Setup Menu.

 

 

101b = Reserved for future use. If specified, treated as value 000b.

 

 

110b = Reserved for future use. If specified, treated as value 000b.

 

 

111b = Reserved for future use. If specified, treated as value 000b.

 

 

 

7:6

Reserved

Reserved for future use. These bits must be set to 0b.

 

 

 

 

 

Disable Flash Update.

5

DFU

If set to 1b, no updates to the Flash image using PROSet is allowed.

 

 

The default for this bit is 0b; allow Flash image updates using PROSet.

 

 

 

 

 

Disable Legacy Wakeup Support.

 

 

If set to 1b, no changes to the Legacy OS Wakeup Support menu

4

DLWS

option is allowed.

 

 

The default for this bit is 0b; allow Legacy OS Wakeup Support menu

 

 

option changes.

 

 

 

 

 

Disable Boot Selection.

3

DBS

If set to 1b, no changes to the boot order menu option is allowed.

 

 

The default for this bit is 0b; allow boot order menu option changes.

 

 

 

20

Image 20
Contents January 316234-006RevisionIntel Corporation P.O. Box 5937 Denver, CO Contents TablesRevision History 1.1Introduction 1.2NVM Programming Procedure Overview1.0Non-VolatileMemory NVM Region Figure 1. LAN NVM RegionsBIOS Region ME Region GbE Region Flash Descriptor Example 1. EEUPDATE /D file1.eep 1.3EEUPDATE Utility1.3.1Command Line Parameters 1.4LAN NVM Format and Contents Table 1. LAN NVM Address MapReserved Word 03h 1.4.1Ethernet Individual Address Words 00h - 02h1.4.2Reserved Word 03h 1.4.3Reserved Word 04h 1.4.4Image Version Information Word 05h1.4.5Reserved Word 06h 1.4.6Reserved Word 07h1.4.8PCI Initialization Control Word 0Ah 1.4.9Subsystem ID Word 0Bh1.4.10Subsystem Vendor ID Word 0Ch PCI Initialization Control Word Word 0Ah1.4.14LAN Power Consumption Word 10h LAN Power Consumption Word 10h1.4.11Device ID Word 0Dh 1.4.12Vendor ID Word 0Eh1.4.15Shared Initialization Control Word 13h Shared Initialization Control Word 13h1.4.16Extended Configuration Word 1 Word 14h 1.4.17Extended Configuration Word 2 Word 15h1.4.18Extended Configuration Word 3 Word 16h Extended Configuration Word 1 Word 14hLED 1 Configuration and Power Management Word 17h 1.4.20LED 0 and 2 Configuration Defaults Word 18h LED ModesLED 0 and 2 Configuration Defaults Word 18h 1.4.21Future Initialization Word 1 Words 19h 1.4.221.4.23PXE Words Words 30h - 3Eh 1.4.23.1Boot Agent Main Setup Options Word 30hTable 18. Boot Agent Main Setup Options prompt message appears, if enabled by DIM NVM Information Guide-ICH8 Disable Protocol Select Table 21. IBA Capabilities 1.4.24Checksum Word 3Fh1.4.23.4IBA Capabilities Word 33h Appendix A ICH8 NVM Contents and Sample Images LAN NVM ContentsA.1 82566DM NVM Image with ICH8 A.2 82566MM NVM Image with ICH8M A.3 82566MC NVM Image with ICH8 A.4 82562V NVM Image with ICH8 Note This page intentionally left blank