Lenovo 3128, 3120, 3122, 3126 manual Cleaning the mouse, Optical mouse, Non-optical mouse

Page 78

Cleaning the mouse

This section provides instructions on how to clean an optical or non-optical mouse.

Optical mouse

An optical mouse uses a light-emitting diode and an optical sensor to navigate the pointer. If the pointer on the screen does not move smoothly with the optical mouse, you might need to clean the mouse.

To clean the optical mouse, do the following:

1.Turn off your computer.

2.Disconnect the mouse cable from the computer.

3.Turn the mouse upside down to check the lens.

a.If there is a smudge on the lens, gently clean the area with a plain cotton-tipped swab.

b.If there is debris in the lens, gently blow the debris away from the area.

4.Check the surface on which you are using the mouse. If you have a very intricate picture or pattern beneath the mouse, it may be difficult for the digital signal processor (DSP) to determine changes in the mouse position.

5.Reconnect the mouse cable to the computer.

6.Turn your computer back on.

Non-optical mouse

The following illustration shows the components of a non-optical mouse.

Note: The illustration might be slightly different from your mouse.

1

2

3

4

Retainer ring

Ball

Plastic rollers

Ball cage

72ThinkCentre User Guide

Image 78
Contents ThinkCentre User Guide Second Edition December Copyright Lenovo Contents Index Important safety information Iv ThinkCentre User Guide Features Product overviewConnectivity Preinstalled operating system Specifications Software overviewSoftware provided with your Windows operating system Lenovo ThinkVantage Tools Lenovo Solution Center LocationsLocating connectors and parts on the rear of your computer Front connector, control, and indicator locationsConnector Description If you use speech-recognition software Locating components Locating parts on the system boardLocating internal drives System board part locationsDrive bay locations Installing or replacing hardware Installing or replacing hardwareHandling static-sensitive devices Installing external options Opening the computer coverRemoving and reinstalling the front bezel Removing the front bezelAccessing the system board components and drives What to do nextInstalling or replacing a memory module Removing a memory moduleInstalling or replacing a PCI card Opening the retaining clipsRemoving a PCI card Installing the PCI card Installing or replacing the card reader Installing the card readerInstalling the card reader Installing the screw that secures the card reader Replacing the card reader Installing the card reader Replacing the battery Removing the old battery Replacing the hard disk driveRemoving the hard disk drive Removing the hard disk drive from the bracket Installing the hard disk drive Replacing the optical drivePivoting the optical drive bay Removing the old optical drive Replacing the heat sink and fan assembly Installing a new optical driveScrews that secure the heat sink and fan assembly Removing the heat sink fan duct Replacing the power supply assembly Installing the heat sink fan ductInstalling or replacing hardware Removing the heat sink fan duct Power connectors on the system board Installing the power supply assembly Replacing the microprocessor Accessing the microprocessor Installing or replacing hardware Replacing the internal speaker Removing the front bezel Removing the cover presence switch Removing the internal speaker Installing the new internal speaker Replacing the front audio and USB assembly Reinstalling the cover presence switchRemoving the front audio and USB assembly Replacing the keyboard Replacing the mouseCompleting the parts replacement Mouse connectorsObtaining device drivers Basic security features Password protectionIntegrated cable lock Erasing a lost or forgotten password clearing Cmos Recovery information Creating and using recovery mediaCreating recovery media Using recovery media Performing backup and recovery operationsPerforming a backup operation Performing a recovery operation Using the Rescue and Recovery workspaceCreating and using a rescue medium Using a rescue mediumCreating a rescue medium Installing or reinstalling device drivers Solving recovery problemsThinkCentre User Guide Viewing or changing settings Using the Setup Utility programStarting the Setup Utility program Using passwordsAdministrator password Password considerationsPower-on password Setting, changing, or deleting a passwordSelecting a startup device Selecting a temporary startup deviceViewing or changing the startup device sequence Exiting the Setup Utility program Using system programs Updating flashing the Bios from a discUpdating system programs Updating flashing the Bios from your operating system Recovering from a Post and Bios update failureUpdating system programs ThinkCentre User Guide Troubleshooting and diagnostic programs Basic troubleshootingDiagnostic programs Lenovo Solution CenterLenovo ThinkVantage Toolbox PC-Doctor for DOSCleaning the mouse Optical mouseNon-optical mouse Troubleshooting and diagnostic programs ThinkCentre User Guide Online Books folder Getting information, help, and serviceInformation resources Lenovo ThinkVantage ToolsLenovo Welcome Access HelpSafety and warranty Lenovo Support Web siteHelp and service Using the documentation and diagnostic programsCalling for service Using other services Purchasing additional servicesAppendix A. Notices Television output notice Trademarks ThinkCentre User Guide Index CRUInstalling options Memory module PCI card Security features Set Power-On Password ThinkCentre User Guide Page 0A94223