Lenovo IdeaPad Z360
1090 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•• “1010 Battery pack” on page 34
•• “1070 DIMM/thermal slot coverr” on page 41
Figure 9. Removal steps of fan assembly and heat sink assembly
Note: Loosen six screws 1, but do not remove them.
Unplug the connector in the direction shown by arrow 2.
|
| 1 |
1 | 1 | 2 |
1 |
| |
|
| |
| 1 | 1 |
|
|
When installing: Make sure that the fan connector is attached firmly to the system board.
43