Lenovo manual Lenovo IdeaPad Z360

Page 65

Lenovo IdeaPad Z360

Note: Applying labels to the base cover

The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following label:

The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.

aMTM&PRC Label

bCOA Label

cRating label

dWLAN Label

eB/T Label

fEnergy Save Label

g Rating Label_Korea

For the location of each label, refer to the following figure:

For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.

a

b

c

d

e

f

g

61

Image 65
Contents IdeaPad Z360 Page Contents About this manual Safety information General safety Electrical safety IdeaPad Z360 Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notice Safety notices multilingual translationsIdeaPad Z360 Hardware Maintenance Manual Safety information IdeaPad Z360 Hardware Maintenance Manual Safety information IdeaPad Z360 Hardware Maintenance Manual Safety information Laser compliance statement Safety information Strategy for replacing FRUs Important service informationImportant notice for replacing a system board Strategy for replacing a hard disk driveImportant information about replacing RoHS compliant FRUs General checkout What to do first Following are not covered under warrantyChecking operational charging Power system checkoutChecking the AC adapter Checking the battery pack Restoring the factory contents by using OneKey Recovery Related service informationSupervisor password PasswordsPower-on password Sleep standby mode Power managementScreen blank mode Hibernation mode Specifications SpecificationsNormal type w/ two Rubber doom button and 1 LED indicator Status indicators Status indicatorsAmber Fn key combinations Fn key combinationsScrew notices FRU replacement noticesRemoving and replacing an FRU Removal steps of battery pack Battery packRemoval steps of dummy card Dummy cardRemoval steps of HDD/PCI Express Mini Card slot cover Hard disk drive HDD/PCI Express Mini Card slot coverRemoval steps of hard disk drive Hard disk driveRemoval steps of optical drive Optical driveRemoval steps of PCI Express Mini Card for wireless LAN/WAN PCI Express Mini Card for wireless LAN/WANWhen installing Removal steps of DIMM/thermal slot cover DIMM/thermal slot coverrRemoval steps of Dimm DimmRemoval steps of fan assembly and heat sink assembly Fan assembly and Heat Sink assemblyIdeaPad Z360 Hardware Maintenance Manual When installing Removal steps of CPU 1100 CPURemoval steps of keyboard KeyboardIdeaPad Z360 Hardware Maintenance Manual Removal steps of keyboard bezel Keyboard bezelWhen installing Lenovo IdeaPad Z360 IdeaPad Z360 Hardware Maintenance Manual Speakers, power board and touch inductive panel Remove one screw 4 and remove the power board Removal steps of system board System boardIdeaPad Z360 Hardware Maintenance Manual Removal steps of LCD unit LCD unitRemove the LCD unit in the direction shown by arrows Removal steps of Base cover Base coverM2.0 × 3.0 mm, flat-head, nylon-coated Black ±0.2 kgfcm Lenovo IdeaPad Z360 Removal steps of LCD front bezel LCD front bezelRemoval steps of LCD panel and hinges LCD panel and hinges±0.2 kgfcm Removal steps of integrated camera Integrated cameraRemoval steps of antenna assembly and LCD cover Antenna assembly and LCD coverFront view LocationsBottom and Left-side view Right-side viewParts list Overall No. FRU FRU no Parts list-Overall4GB LL7 Base SUB Assy W/3G FRU LCD FRUs 13.3-in. HD TFT Parts list-13.3-in. HD TFTLanguage Parts list-Keyboard25011073 25011135 Miscellaneous parts Parts list-Miscellaneous partsAC adapters Parts list-3-pin AC adaptersParts list-3-pin power cords Power cordsLenovo IdeaPad Z360 IdeaPad Z360 Hardware Maintenance Manual APS Trademarks