IdeaPad Z360 Hardware Maintenance Manual
Figure 12. Removal steps of keyboard bezel (continued)
Remove two screws 4. Pull out the black antenna cable form the guide hole and release it from the cable guide in the direction shown by arrow 5. Detach the LCD connector in the direction shown by arrow 6.
| 4 |
6 |
|
5 | 4 |
|
Step | Screw (quantity) | Color | Torque |
|
|
|
|
4 | M2.5 × 5.0 mm, | Black | 2.5±0.2 kgfcm |
|
|
|
|
When installing:
•• Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
•• Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assemblly. Route the LCD cable along the cable guides.
50