IdeaPad Z360 Hardware Maintenance Manual
1200 Antenna assembly and LCD cover
For access, remove these FRUs in order:
•• “1010 Battery pack” on page 34
•• “1020 Dummy card” on page 35
•• “1030 Hard disk drive (HDD)/PCI Express Mini Card slot cover” on page 36
•• “1040 Hard disk drive ” on page 37
•• “1050 Optical drive” on page 38
•• “1060 PCI Express Mini Card for wireless LAN/WAN” on page 39
•• “1070 DIMM/thermal slot coverr” on page 41
•• “1080 DIMM” on page 42
•• “1090 Fan assembly and Heat Sink assembly” on page 43
•• “1110 Keyboard” on page 47
•• “1120 Keyboard bezel” on page 49
•• “1140 System board” on page 55
•• “1150 LCD unit” on page 57
•• “1170 LCD front bezel” on page 62
•• “1180 LCD panel and hinges” on page 63
Figure 20. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the direction shown by arrows 1.
1
1
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
66