Lenovo S230U, 33472YU manual Power system checkout, Checking the ac power adapter

Page 34

1.Go to http://www.lenovo.com/diagnose.

2.Click Lenovo Bootable Diagnostics.

3.Follow the instructions on the Web site to create a bootable diagnostic medium on a USB device or CD.

To use the diagnostic medium you have created, do one of the following:

•If you have created the bootable diagnostic medium on a USB device, do the following:

1.Attach the USB device to the computer.

2.Turn on the computer. If the computer cannot be turned on, go to “Power system checkout” on page 28, and check the power sources. If an error code is displayed, go to “Symptom-to-FRU index” on page 36 for error code descriptions and troubleshooting hints.

3.When the ThinkPad logo is displayed, repeatedly press and release the F12 key. When the Boot Menu window opens, release the F12 key.

4.Use the arrow keys to select USB HDD and then press Enter. The diagnostic program will be launched automatically.

5.Follow the instructions on the screen to use the diagnostic program.

•If you have created the bootable diagnostic medium on a CD, do the following:

1.Turn on the computer. If the computer cannot be turned on, go to “Power system checkout” on page 28, and check the power sources. If an error code is displayed, go to “Symptom-to-FRU index” on page 36 for error code descriptions and troubleshooting hints.

2.Connect an external optical drive to your computer, and insert the CD into the optical drive.

3.Restart the computer.

4.When the ThinkPad logo is displayed, repeatedly press and release the F12 key. When the Boot Menu window opens, release the F12 key.

5.Use the arrow keys to select ATAPI CDx (x: 0, 1, ...) and then press Enter. The diagnostic program will be launched automatically.

6.Follow the instructions on the screen to use the diagnostic program.

Power system checkout

To verify a symptom, do the following:

1.Connect the ac power adapter and turn on the computer.

2.Check that power is supplied when you turn on the computer.

3.Insert a straightened paper clip into the emergency reset hole to reset the computer. Confirm the system is still powered on.

4.Turn off the computer and disconnect the ac power adapter.

5.Check that the battery pack supplies power when you turn on the computer.

If you suspect a power problem, see the appropriate one of the following power supply checkouts:

•“Checking the ac power adapter” on page 28

•“Checking operational charging” on page 29

•“Checking the battery pack” on page 29

•“Checking the backup battery” on page 29

Checking the ac power adapter

If the computer fails only when the ac power adapter is used, do the following:

•If the power-on indicator does not turn on, check the power cord of the ac power adapter for correct continuity and installation.

•If the computer does not charge during operation, go to “Checking operational charging” on page 29

28Hardware Maintenance Manual

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Hardware Maintenance Manual ThinkPad S230uFirst Edition September Copyright Lenovo Contents Appendix A. Notices About this manual IiiIv Hardware Maintenance Manual Safety information General safetyElectrical safety Safety inspection guide Safety notices multilingual translations Grounding requirementsSafety information Hardware Maintenance Manual Safety information Perigo Perigo Vorsicht Vorsicht Vorsicht Safety information Hardware Maintenance Manual Safety information Hardware Maintenance Manual Safety information Hardware Maintenance Manual Safety information Hardware Maintenance Manual Strategy for replacing FRUs Important service informationBefore replacing parts Select Drivers & SoftwareDynamic Configure To Order CTO How to use error messageImportant notice for replacing a system board FRU identification for CTO, CMV, and GAV products Using PEWClick Warranty & Services Click Check Warranty Status Custom Model Variant CMVClick Parts & Accessories Click Product & Parts DetailGeneral checkout What to do firstCheckout guide Lenovo Solution CenterFollowing are not covered under warranty Quick test programsBootable diagnostic programs Uefi diagnostic programTests Tools Checking the ac power adapter Power system checkoutClick Lenovo Bootable Diagnostics Wire Voltage V dc Checking the battery packChecking the backup battery Checking operational chargingHardware Maintenance Manual Related service information Restoring the factory contents by using Recovery Disc SetRefreshing the computer Power-on password PasswordsHard-disk password How to remove the hard-disk password Supervisor passwordHow to remove the power-on password Select Power-On PasswordHibernation mode Power managementSleep mode Select Master HDPSymptom-to-FRU index Wireless off modeNumeric error codes 0191 Run the ThinkPad Setup program, and then save Symptom or error FRU or action, in sequence 01890190 Charge the battery pack 0199 Run the ThinkPad Setup program, and then saveNo-beep symptoms Error messagesBeep symptoms Undetermined problems LCD-related symptomsIntermittent problems Reseat the LCD connectorsHardware Maintenance Manual Status indicators Indicator MeaningIndicator Meaning Special keys Special key DescriptionSpecial key Description Locations Locating computer controls, connectors, and indicatorsFront view Bottom view Rear viewLocating FRUs and CRUs CRU statement for customers Description Self-service CRU Optional-service Major FRUs and CRUsCRU LCD FRUs Looking up FRU information Hinge Button boardHardware Maintenance Manual Plastic to plastic FRU replacement noticesScrew notices Logic card to plasticRestoring the serial number of the system unit Retaining serial numbersMTM on rear label Reading or writing the ECA information Retaining the UuidProduct ID on rear label Hardware Maintenance Manual Removing or replacing a FRU General guidelinesRemoving the SIM card Disabling the built-in batteryBefore servicing the computer Hard disk drive or solid-state driveRemoving or replacing a FRU Removal steps of keyboard KeyboardStep Screw quantity Color Torque Removing or replacing a FRU PCI Express Mini Card for wireless LAN When installingRemoval steps of PCI Express Mini Card for wireless LAN Removal steps of PCI Express Mini Card for wireless WAN Removal steps of mSATA solid-state drive Removal steps of keyboard bezel Keyboard bezel, backup battery, and speaker assemblyStep Screw cap Screw quantity Color Torque M2 × 3 mm, wafer-head, nylon-coated Silver 181 Nm Kgf-cm Hardware Maintenance Manual Battery pack Important notices for replacing a battery pack Proximity sensorsRemoval steps of proximity sensors Removal steps of thermal fan assembly LCD unit Removal steps of LCD unit When installing M2.5 × 3 mm, wafer-head, nylon-coated Silver 181 Nm Kgf-cm DC-in connector Removal steps of DC-in connectorRemoval steps of system board and base cover assembly System board and base cover assemblyImportant notices for handling the system board Applying labels to the base cover Following illustration shows the location of each label LCD panel Button bezelRemoval steps of button bezel Button board Removal steps of LCD panelIntegrated camera Removal steps of button boardRemoval steps of integrated camera HingeRemoval steps of hinge When installing Removal steps of wireless antenna assembly Removing or replacing a FRU Hardware Maintenance Manual Appendix A. Notices Electronic emissions notices TrademarksPage 1P0B48943
Related manuals
Manual 140 pages 6.88 Kb
Top Page Image Contents