Lenovo 6019 manual Selecting a startup device, Selecting a temporary startup device

Page 41

3.Select Security Profile by Device.

4.Select the desired devices and settings and press Enter.

5.Return to the Setup Utility program menu and select Exit and then Save Settings or Save and exit the Setup Utility.

Note: If you do not want to save the settings, select Exit the Setup Utility without saving.

Selecting a startup device

If your computer does not start up from a device such as the CD-ROM, diskette, or hard disk drive as expected, use one of the following procedures to select a startup device.

Selecting a temporary startup device

Use this procedure to startup from any boot device.

Note: Not all CDs, hard disk drives, and diskettes are bootable.

1.Turn off your computer.

2.Press and hold the F12 key then turn on the computer. When the Startup Device Menu appears, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu does not display using this method, repeatedly press and release the F12 key rather than leaving it pressed when turning on the computer.

3.Select the desired startup device from the Startup Device Menu and press Enter to begin.

Note: Selecting a startup device from the Startup Device menu does not permanently change the startup sequence.

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 31).

2.Select Startup.

3.Select Startup Sequence. See the information displayed on the right side of the screen.

4.Select the devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence.

5.Select Exit from the Setup Utility menu and then Save Settings or Save and exit the Setup Utility.

If you have changed these settings and want to return to the default settings, select Load Default Settings on the Exit menu.

Chapter 5. Using the Setup Utility 33

Image 41

Contents ThinkCentre User Guide Page ThinkCentre User Guide Page Contents Index Introduction Vi User Guide Important safety information User Guide Glare and lighting Arranging your workspaceComfort Electrical outlets and cable lengths Air circulationConnecting your computer Setting up your computerUser Guide Setting up your computer User Guide 1394 Completing important tasks Turning on computer powerFinishing the software installation Installing external options Installing other operating systemsUpdating your operating system Updating your antivirus softwareSystem information Input/output features Expansion System information Input/output features Expansion System information Input/output features Three drive bays One 32-bit PCI adapter connector System information Input/output features Two drive bays One 32-bit PCI adapter connector Dimensions Width 400 mm 15.7 Height 175 mm 6.9 Depth 432 mm 17.0in Width 317 mm 12.48 Height 99 mm 3.9 Depth 341 mm 13.4in Width 89 mm 3.5in Height 276 mm 10.9 Depth 273 mm 10.7 User Guide Software provided by Lenovo Software overviewSoftware provided with your Windows operating system PC Doctor for WINPE, PC Doctor for Windows Starting the Setup Utility program Using the Setup UtilityViewing and changing settings Using passwordsAdministrator Password User PasswordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting or changing the startup device sequence Selecting a startup deviceSelecting a temporary startup device Exiting from the Setup Utility program Advanced settingsUpdating system programs Using system programsUpdating flashing Bios from a diskette or CD-ROM Recovering from a POST/BIOS update failure Updating flashing Bios from your operating systemUpdating system programs User Guide Basic troubleshooting Troubleshooting and diagnosticsDiagnostic programs PC-Doctor for DOS PC-Doctor for WindowsRunning diagnostics from the CD or diskettes Optical mouse Cleaning the mousePC-Doctor for Windows PE Non-optical mouse Troubleshooting and diagnostics User Guide Creating and using the Product Recovery disc Recovering softwarePerforming backup and recovery operations Using the Rescue and Recovery workspace Creating and using rescue media To create rescue media, do the following Creating and using a Recovery Repair disketteRecovering or installing device drivers Solving recovery problems Setting a rescue device in the startup sequenceUser Guide Information resources Getting information, help, and serviceOnline Books folder ThinkVantage Productivity CenterSafety and Warranty Access HelpCalling for service Help and serviceUsing the documentation and diagnostic programs Purchasing additional services Using other servicesBasic AT commands Appendix A. Manual modem commandsLow speaker volume Enable RTS/CTS hardware flow control Extended AT commands+MS=? MNP/V.42/V.42bis/V.44 commandsFax Class 2 commands Fax Class 1 commandsVoice commands Appendix A. Manual modem commands User Guide Appendix B. Notices Trademarks Television output noticeIndex 14, 17, 20 Page User Guide Page Part Number 43C6566

Related manuals

Manual 80 pages 34.3 Kb