Lenovo 13 manual LCD unit, When installing

Lenovo IdeaPad Yoga 13 Hardware Maintenance Manual

1090 LCD unit

For access, remove these FRUs in order:

•“1010 Keyboard” on page 33

•“1020 Keyboard bezel” on page 35

•“1030 Battery pack” on page 37

•“1040 Dummy card” on page 39

•“1050 DIMM” on page 40

•“1060 SSD Card” on page 41

•“1070 Fan assembly and Heat Sink assembly” on page 42

•“1080 System board” on page 44

Figure 9. Removal steps of LCD unit

Remove four screws a.

a a

a a

Step	Screw (quantity)	Color	Torque
a	M2 × 3 mm, flat-head, nylok-coated (3)	Black	2.0 kgfcm
	M2 × 3 mm, flat-head, nylok-coated (3)	Black	2.0 kgfcm

When installing:

•Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

•Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides.

48