Appendix B - Wireless Technology

Step 2: Confirm the Installation of the USB Driver on the PC

The first time each AMX touch panel is connected to the PC it is detected as a new hardware device and the USBLAN driver becomes associated with it (panel specific). Each time thereafter the panel is "recognized" as a unique USBLAN device and the association to the driver is done in the background. When the panel is detected for the first time some user intervention is required during the association between panel and driver.

1.After the installation of the USB driver has been completed, confirm the proper installation of the large Type-A USB connector to the PC's USB port, and restart your machine.

If the panel is already powered, continue with steps 3. The panel MUST be powered and configured for USB communication before connecting the mini-USB connector to the panel’s Program Port.

2.Connect the terminal end of the power cable to the 12 VDC power connector on the side/rear of the pane, and supply power. If using an MVP that is installed onto a docking station, feed power to the docked panel by connecting the appropriate power supply to the docking station.

After the panel powers-up, access the firmware setup pages by either:

-MVP - Pressing and holding the two lower buttons on both sides of the display for 3 seconds.

-CV7/CV10 - Pressing the grey Front Setup Access button for 3 seconds.

-700Vi/1000Vi - Pressing the grey Front Setup Access button for 3 seconds.

3.Select Protected Setup > System Settings (located on the lower-left) to open the System Settings page.

4.Toggle the blue Type field (from the Master Connection section) until the choice cycles to USB.

The connection remains RED after changing the communication from Ethernet to USB until the panel is rebooted.

Once the panel restarts, the connection turns a dark green until connected to an active USB cable.

5.Press the Back button on the touch panel to return to the Protected Setup page.

6.Press the on-screen Reboot button to both save any changes and restart the panel. Remember that the panel’s connection type must be set to USB prior to rebooting the panel and prior to inserting the USB connector.

7.ONLY AFTER the unit displays the first panel page, THEN insert the mini-USB connector

into the Program Port on the panel.

It may take a minute for the panel to detect the new connection and send a signal to the PC (indicated by a green System Connection icon). If this is your first time installing the USB driver, a USB driver installation popup window appears on the PC.

8.Complete the USB driver installation process by clicking Yes and then installing the new AMX USB LAN LINK when told that a new USB device was found. This action accepts the installation of the new AMX USB driver.

9.Reboot the panel. Once restarted, the panel is now configured to communicate directly with the PC.

The mini-USB connector MUST be then plugged into an already active panel before the PC can recognize the connection and assign an appropriate USB driver. This driver is part of both the NetLinx Studio and TPDesign4 software application installations.

212

10" Modero Widescreen Touch Panels

Page 221 Page 223
Page 222
Image 222
AMX NXD-1000Vi manual Confirm the Installation of the USB Driver on the PC
Page 221 Page 223

NXD-1000Vi specifications

The AMX NXD-1000Vi is a sophisticated touchpanel designed for a multitude of installation environments, ranging from corporate boardrooms to educational institutions and high-end residential settings. This 10-inch color touchpanel exemplifies advanced technology combined with user-friendly features, making it a popular choice among integrators and end-users alike.

One of the standout features of the NXD-1000Vi is its high-resolution display, which measures 10.1 inches diagonally, providing a crisp and clear visual experience. The capacitive touchscreen allows for seamless navigation, supporting multi-touch gestures similar to those found on modern smartphones and tablets. This intuitive interface enables users to control AV systems, lighting, HVAC, and more with minimal learning curve.

The NXD-1000Vi incorporates advanced technologies such as Wi-Fi connectivity, which enhances flexibility in system design. This wireless capability allows for easy placement of the touchpanel without the constraints of Ethernet cabling, making it suitable for both new installations and upgrades. Additionally, it supports PoE (Power over Ethernet), providing power and data over a single cable, simplifying installation efforts by reducing the number of cables needed.

In terms of processing power, the NXD-1000Vi features rapid response times, ensuring that commands are executed swiftly. Coupled with its user-friendly graphical interface, this touchpanel allows for customization that can adapt to diverse user needs and preferences. It can be programmed to manage various devices and systems, making it a versatile solution for control in various environments.

The touchpanel also supports integrated video capabilities, allowing for the display of video feeds, making it ideal for monitoring and presentation purposes. Furthermore, it includes built-in speakers for audio feedback, enhancing the interactive experience for users.

Durability is a key characteristic of this device, as it is designed to withstand daily use in busy environments. Its sleek design not only looks professional but also ensures that it is easy to clean and maintain. With its robust set of features and adaptability, the AMX NXD-1000Vi stands out as an excellent choice for those looking to enhance their control system with an intuitive and reliable interface.
Top Page Image Contents