AMX NXD-1000Vi manual Jst, Mbt, Mdc, Sho

					Programming
^JST	The alignment of 0 is followed by ',<left>,<top>'. The left and top coordinates are relative
Set text	to the upper left corner of the button.
alignment using a	Syntax:
numeric keypad	"'^JST-<vt addr range>,<button states range>,<new text
layout for those
	alignment>'"
buttons with a
	Variable:
defined address
range.	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	new text alignment = Value of 1 - 9 corresponds to the following locations:
	0
		1	2	3	Zero can be used for an absolute position
		4	5	6
		7	8	9
	Example:
	SEND_COMMAND Panel,"'^JST-500.504&510.515,1&2,1'"
	Sets the text alignment to the upper left corner for those buttons with variable text ranges
	of 500-504 & 510-515.
^MBT	Syntax:
Set the Mouse	"'^MBT-<pass data>'"
Button mode On	Variable:
for the virtual PC.
	pass data:
	0 = None
	1 = Left
	2 = Right
	3 = Middle
	Example:
	SEND COMMAND Panel,"'^MBT-1'"
	Sets the mouse button mode to ’Left Mouse Click’.
^MDC	Syntax:
Turn On the	"'^MDC'"
’Mouse	Example:
double-click’
	SEND COMMAND Panel,"'^MDC'"
feature for the
virtual PC.	Sets the mouse double-click for use with the virtual PC.
^SHO	Syntax:
Show or hide a	"'^SHO-<vt addr range>,<command value>'"
button with a set	Variable:
variable text
	variable text address range = 1 - 4000.
range.

command value = (0= hide, 1= show).

Example:

SEND_COMMAND Panel,"'^SHO-500.504&510.515,0'"

Hides buttons with variable text address range 500-504 & 510-515.

"^" Button Commands (Cont.)

10" Modero Widescreen Touch Panels 167