AMX NXD-1000Vi manual SIP Setup Commands

Programming

SIP Commands (Cont.)

^PHN-

TRANSFER

Transfers the call to the provided number.

Syntax:

"’^PHN-TRANSFER, <connection id>, <number>’"

Variable:

connection id = The identifying number of the connection

number = The number to which you want to transfer the call.

Example:

SEND_COMMAND Panel,"'^PHN-TRANSFER, 1, 2125551000'"

The following table lists and describes SIP setup commands. Using any of these commands causes the current user to go offline.

SIP Setup Commands

^PHN-SETUP-	Syntax:
DOMAIN	"’^PHN-SETUP-DOMAIN, <domain>’"
Sets the realm for	Variable:
authentication.
	domain = The realm used for authentication
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-DOMAIN, asterisk’"
^PHN-SETUP-	Once the configuration has been updated, the ENABLE command should be run to
ENABLE	re-register the new user.
Registers a new	Syntax:
user	"’^PHN-SETUP-ENABLE’"
^PHN-SETUP-	Syntax:
PASSWORD	"’^PHN-SETUP-PASSWORD, <password>’"
Sets the user	Variable:
password for the
	password = The password for the user name
proxy server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-PASSWORD, 6003’"
^PHN-SETUP-	Syntax:
PORT	"’^PHN-SETUP-PORT, <port>’"
Sets the port	Variable:
number for the
	port = The port for the proxy server
proxy server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-PORT, 5060’"
^PHN-SETUP-	Syntax:
PROXYADDR	"’^PHN-SETUP-PROXYADDR, <IP>’"
Sets the IP	Variable:
address for the
	IP = The IP address for the proxy server
proxy server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-PROXYADDR, 192.168.223.111’"
^PHN-SETUP-	Syntax:
STUNADDR	"’^PHN-SETUP-STUNADDR, <IP>’"
Sets the IP	Variable:
address for the
	IP = The IP address for the STUN server
STUN server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-STUNADDR, 192.168.223.111’"

196 10" Modero Widescreen Touch Panels