Installation

Installing an NXD-1000Vi into an (optional) Rack Mount Kit (NXA-RK10)

The NXA-RK10 is a 8.72" (22.15 cm) wide high metal rack-mount (with black matte finish) measuring 5 RUs (rack units) high.

1.Remove the Faceplate/Trim Ring assembly from the main NXD-1000Vi unit.

2.Thread the incoming power, RJ-45 audio/video, Ethernet, and USB wiring (from their terminal sources) through the surface opening, leaving enough slack in the wiring to accommodate any re- positioning of the panel.

3.Connect all data and power wiring connectors to their corresponding locations along the left side of the (un-powered) NXD touch panel.

Verify that the terminal end of the power cable is not connected to the a power supply before plugging in the 2-pin power connector.

The USB connectors can be from a either a USB extension cable, or a wireless USB RF transmitter.

4.Test the incoming wiring by connecting the panel connections to their terminal locations and applying power. Verify that the panel is receiving power and functioning properly to prevent repetition of the installation.

5.Disconnect the terminal end of the power cable from the connected power supply.

Don’t disconnect the connectors from the touch panel. The unit must be installed with the necessary connectors before being inserted into the equipment rack.

6.Carefully insert the NXD-1000Vi panel into the NXA-RK10.

7.Secure the panel to the NXA-RK10 mount by first inserting and then tightening the four #4-40 screws (included).

8.Insert the NXA-RK10 (with connected NXD unit) into the equipment rack, making sure to align the screw holes along the sides on the NXA-RK10 with the holes in the equipment rack.

9.Use a grounded Phillips-head screwdriver to secure the NXA-RK10 to the equipment rack using #10-32 screws (included).

10.Place the Faceplate/Trim Ring assembly back onto the main NXD unit. Make sure to align the Microphone, Light, and PIR Motion sensor locations to their respective openings on the front faceplate/bezel.

11.Reconnect the terminal RJ-45 audio/video, Ethernet, and USB wiring to their respective terminal locations on either the NXA-AVB/ETHERNET Breakout Box, Ethernet port, or NetLinx Master.

12.Reconnect the terminal power connector on the 12 VDC-compliant power supply and apply power.

36

10" Modero Widescreen Touch Panels

Page 45 Page 47
Page 46
Image 46
AMX NXD-1000Vi manual Installation
Page 45 Page 47

NXD-1000Vi specifications

The AMX NXD-1000Vi is a sophisticated touchpanel designed for a multitude of installation environments, ranging from corporate boardrooms to educational institutions and high-end residential settings. This 10-inch color touchpanel exemplifies advanced technology combined with user-friendly features, making it a popular choice among integrators and end-users alike.

One of the standout features of the NXD-1000Vi is its high-resolution display, which measures 10.1 inches diagonally, providing a crisp and clear visual experience. The capacitive touchscreen allows for seamless navigation, supporting multi-touch gestures similar to those found on modern smartphones and tablets. This intuitive interface enables users to control AV systems, lighting, HVAC, and more with minimal learning curve.

The NXD-1000Vi incorporates advanced technologies such as Wi-Fi connectivity, which enhances flexibility in system design. This wireless capability allows for easy placement of the touchpanel without the constraints of Ethernet cabling, making it suitable for both new installations and upgrades. Additionally, it supports PoE (Power over Ethernet), providing power and data over a single cable, simplifying installation efforts by reducing the number of cables needed.

In terms of processing power, the NXD-1000Vi features rapid response times, ensuring that commands are executed swiftly. Coupled with its user-friendly graphical interface, this touchpanel allows for customization that can adapt to diverse user needs and preferences. It can be programmed to manage various devices and systems, making it a versatile solution for control in various environments.

The touchpanel also supports integrated video capabilities, allowing for the display of video feeds, making it ideal for monitoring and presentation purposes. Furthermore, it includes built-in speakers for audio feedback, enhancing the interactive experience for users.

Durability is a key characteristic of this device, as it is designed to withstand daily use in busy environments. Its sleek design not only looks professional but also ensures that it is easy to clean and maintain. With its robust set of features and adaptability, the AMX NXD-1000Vi stands out as an excellent choice for those looking to enhance their control system with an intuitive and reliable interface.
Top Page Image Contents