AMX NXD-1000Vi manual Input Commands, Cal, Kps

Programming

Input Commands

These Send Commands are case insensitive.

Input Commands

^CAL	Syntax:
Put panel in	"'^CAL'"
calibration mode.	Example:
	SEND COMMAND Panel,"'^CAL'"
	Puts the panel in calibration mode.
^KPS	Syntax:
Set the	"'^KPS-<pass data>'"
keyboard	Variable:
passthru.
	pass data:
	<blank/empty> = Disables the keyboard.
	0 = Pass data to G4 application (default). This can be used with VPC or text areas.
	1 - 4 = Not used.
	5 = Sends out data to the Master.
	Example:
	SEND COMMAND Panel,"'^KPS-5'"
	Sets the keyboard passthru to the Master. Option 5 sends keystrokes directly to the
	Master via the Send Output String mechanism. This process sends a virtual keystroke
	command (^VKS) to the Master.
	Example 2:
	SEND COMMAND Panel,"'^KPS-0'"
	Disables the keyboard passthru to the Master.
	The following point defines how the parameters within this command work:
	• Accepts keystrokes from any of these sources: attached USB keyboard or Virtual
	keyboard.
^MBT	Syntax:
Set the mouse	"'^MBT-<0-3>'"
button mode for	Variable:
the virtual PC.
	0 = None.
	1 = Left.
	2 = Middle.
	3 = Right.
	Example:
	SEND COMMAND Panel,"'^MBT-1'"
	Sets the mouse button mode for the virtual PC to LEFT.
^MDC	Syntax:
Set the mouse	"'^MDC'"
double click ON	Example:
for the virtual PC.
	SEND COMMAND Panel,"'^MDC'"
	Enables the double click for the virtual PC.

184 10" Modero Widescreen Touch Panels