AMX NXD-1000Vi manual Cfsm, Cex, Dld, Mut, @Pwd

Programming

Panel Setup Commands

^CFSM	Syntax:
Sets the Flash	“’^CFSM’”
cache to the	Variable:
maximum
	There is no parameter for this command.
available size
allowed for	Example:
backup Flash	SEND_COMMAND Panel, “’^CFSM’”
cache.
	Modifies the Flash cache size to the maximum available size for the device.
(determined by
taking 75% of free
Flash space)
^CEX	Syntax:
Changes the	“’^CEX-<time index>’”
default expiration	Variable:
time for entries in
	time index:
the image cache
(applies to both	• 1 = 2 Hours
primary RAM	• 2 = 8 Hours
cache and backup
	• 3 = 1 Day
Flash cache).
	• 4 = 2 Days
The default
expiration time	• 5 = 5 Days
applies to	• 0 = NEVER
dynamic images
	Example:
only.
	SEND_COMMAND Panel, “’^CEX-4’”
	Changes the default expiration time to 2 Days.
^DLD	Syntax:
Set the disable	“’^DLD-<0/1>’”
cradle LED flag.	Variables:
	0 - LEDs operate normally
	1 - Cradle LEDs operate dim setting only
	Example:
	SEND_COMMAND Panel, “’^DLD-1’”
	Sets the cradle LEDs to the dim setting.
^MUT	Syntax:
Set the panel	"'^MUT-<mute state>'"
mute state.	Variable:
	mute state= 0 = Mute Off and 1 = Mute On.
	Example:
	SEND_COMMAND Panel,"'^MUT-1''"
	Sets the panel’s master volume to mute.
@PWD	@PWD sets the level 1 password only.
Set the page flip	Syntax:
password.	"'@PWD-<page flip password>'"
	Variables:
	page flip password = 1 - 50 ASCII characters.
	Example:
	SEND COMMAND Panel,"'@PWD-Main'"
	Sets the page flip password to 'Main'.

188 10" Modero Widescreen Touch Panels