AMX NXD-1000Vi manual Panel Setup Commands

Programming

Panel Setup Commands

These commands are case insensitive.

Panel Setup Commands

CLOCK	Syntax:
Sets the time and	“’CLOCK mm-dd-yy hh:mm:ss’”
date on the panel.	Variables:
	mm = Month
	dd = Day
	yy = Year
	hh = Hour
	mm = Minute
	ss = Second
	Example:
	SEND_COMMAND Panel, “’CLOCK 04-19-76 19:16:00’”
	Sets the time and date on the panel to April 19, 1976, 7:16 PM.
^CFE	Syntax:
Enable or disable	“’^CFE-<0/1>’”
the image Flash	Variables:
backup cache
	0 - for disable
	1 - for enable
	Example:
	SEND_COMMAND Panel, “’^CFE-1’”
	Tells the cache manager to enable the Flash backup image cache.
^CPR	Syntax:
Purge the cache	“’^CPR-<cache mask>’”
when needed in	Variables:
the context of the
	cache mask:
running program.
	• 0x0001 - Purge non-volatile (Flash) image cache
	• 0x0002 - Purge RAM image cache
	• 0x0003 - Purge both non-volatile and RAM image caches
	Example:
	SEND_COMMAND Panel, “’^CPR-3’”
	Purges all images from both primary RAM cache and backup Flash cache.
^CFS	Syntax:
Modifies the size	“’^CFS-<size in MB>’”
of the backup	Variable:
image Flash
	size in MB - MB of allocated Flash memory
cache.
	Example:
	SEND_COMMAND Panel, “’^CFS-12’”
	Modifies the Flash cache size to 12MB.
	The space is not immediately allocated to the backup cache, it is consumed as needed for
	new entries in the Flash cache. If the size is reduced to something less than the size of the
	items currently stored in Flash cache, the least recently used items are deleted one by
	one until the used disk space is less than the maximum provided in the ^CFS command. If
	the size is larger than the maximum size allowed for the Flash cache (determined by tak-
	ing 75% of free Flash space), the size reverts to the maximum size allowed.

10" Modero Widescreen Touch Panels 187