AMX NXD-1000Vi manual Configuring Communication

Table of Contents
Testing your Calibration	42
Configuring Communication	43
Modero Setup and System Settings	43
Accessing the Setup and Protected Setup Pages	43
Setting the Panel’s Device Number	44
Wireless Settings Page - Wireless Access Overview	44
Hot Swapping	44
Configuring a Wireless Network Access	45
Step 1: Configure the Panel’s Wireless IP Settings	45
Wireless communication using a DHCP Address	45
Wireless communication using a Static IP Address	46
Using the Site Survey tool	46
Step 2: Configure the Card’s Wireless Security Settings	48
Configuring the Modero’s wireless card for unsecured access to a WAP200G	49
Configuring the Modero’s wireless card for secured access to a WAP200G	51
Automatically set SSID	51
Manually set SSID	52
Configuring multiple wireless Moderos to communicate to a target WAP200G	55
Step 3: Choose a Master Connection Mode	55
USB	55
Prepare your PC for USB communication with the panel	56
Configure the panel for USB communication	56
Configure a Virtual NetLinx Master using NetLinx Studio	57
Ethernet	59
Master Connection to a Virtual Master via Ethernet	59
Using G4 Web Control to Interact with a G4 Panel	62
Using your NetLinx Master to control the G4 panel	64
Upgrading Modero Firmware	67
Upgrading the Modero Firmware via the USB port	67
Step 1: Configure the panel for a USB Connection Type	67
Step 2: Prepare NetLinx Studio for communication via the USB port	68
Step 3: Confirm and Upgrade the firmware via the USB port	69
Upgrading the Modero Firmware via Ethernet (IP Address)	71
Step 1: Prepare the Master for communication via an IP	71
Step 2: Prepare the panel for communication via an IP	72
Step 3: Verify and Upgrade the panel firmware via an IP	73
Firmware Pages and Descriptions	75
Setup Navigation Buttons	75
Protected Setup Page	75

ii 10" Modero Widescreen Touch Panels