Manuals / AMX / Computer Equipment / Computer Monitor

AMX manual Wiring Guidelines for the NXD-1000Vi Panels, Preparing captive wires

Models: NXD-1000Vi

1 234
Download 234 pages 35.81 Kb
Page 47
Image 47

Installation

Wiring Guidelines for the NXD-1000Vi Panels

NXD-1000Vi panels use a 12 VDC-compliant power supply to provide power to the panel via the 2-pin

3.5mm mini-Phoenix PWR connector. Use the power requirements information (page 3) to determine the power draw.

The incoming PWR and GND wires from the power supply must be connected to the corresponding locations within the PWR connector.

These units should only have one source of incoming power. Using more than one source of power to the touch panel can result in damage to the internal components and a possible burn out.

Apply power to the panels only after installation is complete.

Preparing captive wires

You will need a wire stripper and flat-blade screwdriver to prepare and connect the captive wires.

Never pre-tin wires for compression-type connections.

1.Strip 0.25 inch (6.35 mm) of insulation off all wires.

2.Insert each wire into the appropriate opening on the connector (according to the wiring diagrams and connector types described in this section).

3.Tighten the screws to secure the wire in the connector. Do not tighten the screws excessively; doing so may strip the threads and damage the connector.

Wiring a power connection

To use the 2-pin 3.5 mm mini-Phoenix connector for use with a 12 VDC-compliant power supply, the incoming PWR and GND wires from the external source must be connected to their corresponding locations on the connector (FIG. 26).

PWR +

GND -

To the Touch Panel

FIG. 26 NetLinx power connector wiring diagram

Power Supply

1.Insert the PWR and GND wires on the terminal end of the 2-pin 3.5 mm mini-Phoenix cable. Match the wiring locations of the +/- on both the power supply and the terminal connector.

2.Tighten the clamp to secure the two wires. Do not tighten the screws excessively; doing so may strip the threads and damage the connector.

3.Verify the connection of the 2-pin 3.5 mm mini-Phoenix to the external 12 VDC-compliant power supply.

10" Modero Widescreen Touch Panels

37

 

 

Page 46 Page 48
Page 47
Image 47
AMX manual Wiring Guidelines for the NXD-1000Vi Panels, Preparing captive wires, Wiring a power connection
Page 46 Page 48

NXD-1000Vi specifications

The AMX NXD-1000Vi is a sophisticated touchpanel designed for a multitude of installation environments, ranging from corporate boardrooms to educational institutions and high-end residential settings. This 10-inch color touchpanel exemplifies advanced technology combined with user-friendly features, making it a popular choice among integrators and end-users alike.

One of the standout features of the NXD-1000Vi is its high-resolution display, which measures 10.1 inches diagonally, providing a crisp and clear visual experience. The capacitive touchscreen allows for seamless navigation, supporting multi-touch gestures similar to those found on modern smartphones and tablets. This intuitive interface enables users to control AV systems, lighting, HVAC, and more with minimal learning curve.

The NXD-1000Vi incorporates advanced technologies such as Wi-Fi connectivity, which enhances flexibility in system design. This wireless capability allows for easy placement of the touchpanel without the constraints of Ethernet cabling, making it suitable for both new installations and upgrades. Additionally, it supports PoE (Power over Ethernet), providing power and data over a single cable, simplifying installation efforts by reducing the number of cables needed.

In terms of processing power, the NXD-1000Vi features rapid response times, ensuring that commands are executed swiftly. Coupled with its user-friendly graphical interface, this touchpanel allows for customization that can adapt to diverse user needs and preferences. It can be programmed to manage various devices and systems, making it a versatile solution for control in various environments.

The touchpanel also supports integrated video capabilities, allowing for the display of video feeds, making it ideal for monitoring and presentation purposes. Furthermore, it includes built-in speakers for audio feedback, enhancing the interactive experience for users.

Durability is a key characteristic of this device, as it is designed to withstand daily use in busy environments. Its sleek design not only looks professional but also ensures that it is easy to clean and maintain. With its robust set of features and adaptability, the AMX NXD-1000Vi stands out as an excellent choice for those looking to enhance their control system with an intuitive and reliable interface.