AMX NXD-1000Vi manual Bnn, Bnp, Bnt, Bop

Programming

^BNN	Syntax:
Set the TakeNote	"'^BNN-<vt addr range>,<network name>'"
network name for	Variable:
the specified
	variable text address range = 1 - 4000.
Addresses.
	network name = Use a valid IP Address.
	Example:
	SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'"
	Sets the TakeNote button network name to 192.168.169.99.
^BNP	Syntax:
Set the TakeNote	"'^BNP-<vt addr range>,<network password>'"
network	Variable:
password for the
	variable text address range = 1 - 4000.
specified
	network password = Password for the network.
Addresses.
	Example:
	SEND_COMMAND Panel,"'^BNN-973,12345'"
	Sets the TakeNote button network password to 12345.
^BNT	Syntax:
Set the TakeNote	"'^BNT-<vt addr range>,<network port>'"
network port for	Variable:
the specified
	variable text address range = 1 - 4000.
Addresses.
	network port = 1 - 65535.
	Example:
	SEND_COMMAND Panel,"'^BNT-973,5000'"
	Sets the TakeNote button network port to 5000.
^BOP	The button opacity can be specified as a decimal between 0 - 255, where zero (0) is
Set the button	invisible and 255 is opaque, or as a HEX code, as used in the color commands by
	preceding the HEX code with the # sign. In this case, #00 becomes invisible and #FF
opacity.
	becomes opaque. If the opacity is set to zero (0), this does not make the button inactive,
	only invisible.
	Syntax:
	"'^BOP-<vt addr range>,<button states range>,<button opacity>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	button opacity = 0 (invisible) - 255 (opaque).
	Example:
	SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,200'"
	Example 2:
	SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,#C8'"
	Both examples set the opacity of the buttons with the variable text range of 500-504 and
	510-515 to 200.

"^" Button Commands (Cont.)

158 10" Modero Widescreen Touch Panels