Configuring Communication

This information can be found in either the Workspace - System name > Define Device section of your code (that defines the properties for your panel), or in the Device Addressing/Network Addresses section of the Tools > NetLinx Diagnostics dialog.

6.Setup the security and communication parameters between the wireless card and the target WAP by configuring the Wireless Settings section on this page. Refer to Step 2: Configure the Card’s Wireless Security Settings section on page 48 for detailed procedures to setup either a secure or unsecure connection.

Wireless communication using a Static IP Address

In the Protected Setup page:

1.Press the Wireless Settings button (located on the lower-left) to open the Wireless Settings page. Wireless communication is set within the IP Settings section of this page (FIG. 35).

Check with your System Administrator for a pre-reserved Static IP Address assigned to the panel. This address must be obtained before Static assignment of the panel continues.

2.Toggle the DHCP/Static field (from the IP Settings section) until the choice cycles to Static. The IP Address, Subnet Mask, and Gateway fields then become user-editable (red).

3.Press the IP Address field to open a Keyboard and enter the Static IP Address (provided by your System Administrator).

4.Press Done after you are finished entering the IP information.

5.Repeat the same process for the Subnet Mask and Gateway fields.

6.Press the optional Host Name field to open the Keyboard and enter the Host Name information.

7.Press Done after you are finished assigning the alpha-numeric string of the host name.

8.Press the Primary DNS field to open a Keyboard, enter the Primary DNS Address (provided by your System Administrator) and press Done when compete. Repeat this process for the Secondary DNS field.

9.Press the Domain field to open a Keyboard, enter the resolvable domain Address (this is provided by your System Administrator and equates to a unique Internet name for the panel), and press Done when complete.

10.Setup the security and communication parameters between the wireless card and the target WAP by configuring the Wireless Settings section on this page. Refer to the following section for detailed procedures to setup either a secure or unsecure connection.

Using the Site Survey tool

This tool allows a user to "sniff-out" all transmitting Wireless Access Points within the detection range of the internal NXA-WC80211GCF. Once pressed, the panel displays the Site Survey page which contains categories such as:

Network Name (SSID) - Wireless Access Point names

Channel (RF) - Channel currently being used by the WAP (Wireless Access Point)

Security Type (if detectable - such as WEP, OPEN and UNKNOWN) - security protocol enabled on the WAP

Signal Strength - None, Poor, Fair, Good, Very Good, and Excellent

MAC Address - Unique identification of the transmitting Access Point

46

10" Modero Widescreen Touch Panels

Page 55 Page 57
Page 56
Image 56
AMX NXD-1000Vi manual Wireless communication using a Static IP Address, Using the Site Survey tool
Page 55 Page 57

NXD-1000Vi specifications

The AMX NXD-1000Vi is a sophisticated touchpanel designed for a multitude of installation environments, ranging from corporate boardrooms to educational institutions and high-end residential settings. This 10-inch color touchpanel exemplifies advanced technology combined with user-friendly features, making it a popular choice among integrators and end-users alike.

One of the standout features of the NXD-1000Vi is its high-resolution display, which measures 10.1 inches diagonally, providing a crisp and clear visual experience. The capacitive touchscreen allows for seamless navigation, supporting multi-touch gestures similar to those found on modern smartphones and tablets. This intuitive interface enables users to control AV systems, lighting, HVAC, and more with minimal learning curve.

The NXD-1000Vi incorporates advanced technologies such as Wi-Fi connectivity, which enhances flexibility in system design. This wireless capability allows for easy placement of the touchpanel without the constraints of Ethernet cabling, making it suitable for both new installations and upgrades. Additionally, it supports PoE (Power over Ethernet), providing power and data over a single cable, simplifying installation efforts by reducing the number of cables needed.

In terms of processing power, the NXD-1000Vi features rapid response times, ensuring that commands are executed swiftly. Coupled with its user-friendly graphical interface, this touchpanel allows for customization that can adapt to diverse user needs and preferences. It can be programmed to manage various devices and systems, making it a versatile solution for control in various environments.

The touchpanel also supports integrated video capabilities, allowing for the display of video feeds, making it ideal for monitoring and presentation purposes. Furthermore, it includes built-in speakers for audio feedback, enhancing the interactive experience for users.

Durability is a key characteristic of this device, as it is designed to withstand daily use in busy environments. Its sleek design not only looks professional but also ensures that it is easy to clean and maintain. With its robust set of features and adaptability, the AMX NXD-1000Vi stands out as an excellent choice for those looking to enhance their control system with an intuitive and reliable interface.
Top Page Image Contents