Notes:
-If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound. The audio format of the DVD disc in play is displayed in the Status Window when changing the audio format.
-6 Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital
-SACD
-When you connect to the amplifier/receiver which does not have a multichannel decoder, select "PCM only" on the users preference.
COMPONENT connection
1Connect the COMPONENT sockets (8) to corresponding sockets on the TV using the video cables.
2If you wish to receive the sound via your TV, connect the AUDIO OUT Left and Right output sockets to the corresponding sockets on the TV using the audio cable.
Note: COMPONENT connection allows you to enjoy higher quality picture playback than S1 connection.
AC IN | FILTER |
|
| MULTI CHANNEL AUDIO OUT |
|
| |
FRONT R | FRONT L | SURROUND R | SURROUND L | CENTER |
1.STANDARD ALL 2.CUSTOM ST 3.CUSTOM ALL
|
|
|
|
|
|
|
|
| REMOTE CONTROL | |
DIGITAL AUDIO OUT | R | AUDIO OUT | L | VIDEO |
| VIDEO OUT |
|
| INTERNAL | |
OPT. | COAX. | 1 |
|
|
| 1 | COMPONENT | S1 |
| EXTERNAL |
|
|
|
|
|
| C | C | Y | IN | OUT |
|
| 2 |
|
|
| 2 |
|
|
|
|
English
Connecting to a TV
Notes
-Depending on your TV, there are various ways to connect the player. These are shown in the illustration below.
-Please refer to your TV, VCR, and any other User Manual(s) as necessary to make the optimal connections.
-Do not connect your
-Some SOUND MODE settings make unable to hear the sound from TV speakers depending on the discs. See page 19 "SOUND OUTPUT".
(red) (white)
To Analog Audio output
Audio/video cable (6)
| To S Video output | |
(CR) | (CB) (Y) |
|
(Yellow) | To Component | S video |
cable | ||
| video output | (7) |
To Video output
Video cable (8) |
| |
| To | |
To Component | S Video | |
input | ||
video input | ||
|
To Video input |
To Audio input
Video connection
1Connect the VIDEO OUT socket (6) to the corresponding socket on the TV using the video cable.
2If you wish to receive the sound via your TV, connect the AUDIO OUT Left and Right output sockets to the corresponding sockets on the TV using the audio cable.
S1 connection
1Connect the S1 OUT socket (7) to the corresponding socket on the TV using an
●If you wish to receive the sound via your TV, connect the AUDIO OUT Left and Right output sockets to the corresponding sockets on the TV using the audio cable.
Note: S1 connection allows you to separate color and brightness signal to be transmitted.
TV or monitor with audio/video input
13