Marantz SA-12S1 manual Connecting the power supply, Infrared remote control, Loading the batteries

Connecting the power supply

1Plug the power cable into AC IN.

2Plug the male end of the cord into the mains.

Note: As long as this player is connected to mains, it still keeps loosing the power. Please plug off the AC cord if you want to save the electricity fee.

Infrared remote control

Loading the batteries

1Open the battery compartment cover.

2Insert two 'AAA' (R-03) batteries as indicated inside the battery compartment.

3Close the cover.

Caution: Do not use old and new batteries together. Also never use different types of batteries together(standard, alkaline, etc.)

Remote control

Operate the remote control unit (RC-12SAS1) within a distance of approx. 5 m from the infrared signal reception window (remote sensor) on the front of the SACD player.

Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor.

Remote control operating range

SA-12S1

Remote control unit（RC-12SAS1）

15

English