Lenovo RD530, RD630, RD330 manual Session

Page 29

Session

The IPMI Serial contains the following options:

Table 8. IPMI Serial

Option	Comments

Connection	Sets the IPMI serial connection mode from a drop-down list. Available values are Direct Connect
Mode Settings	Basic Mode and Direct Connect Terminal Mode.

Baud Rate	Sets the IPMI serial baud rate (data speed) from a drop-down list. Available values are 9600 bps,
	19.2 kbps, 38.4 kbps, 57.6 kbps, and 115.2 kbps.

Flow Control	Sets the Flow control value from a drop-down list. Available values are None and RTS/CTS
	Flow Control.

Channel Privilege	Sets the channel privilege level from a drop-down list. Available levels are Administrator,
Level Limit	Operator, and User.

The IPMI Settings provides remote configuration over LAN. To activate IPMI remote configuration by LAN, check the Enable IPMI Over LAN option, define the Channel Privilege Level Limit, and enter the Encryption Key. When you finish the configuration, click Apply Changes.

Table 9. IPMI Settings

Option		Comments

Enable IPMI Over		Enables the IPMI Over LAN when the checkbox is checked.
LAN

Channel Privilege		Sets the maximum privilege level that can be accepted on the LAN channel. Available levels are
Level Limit		Administrator, Operator, and User.

Encryption Key		Sets the encryption key. This field allows from 0 to 20 two-digit Hex characters and no spaces.

Figure 21. IPMI Serial and IPMI Settings

Session

This page displays the information about Active Sessions. Additionally, the trash icon provides the delete function for privileged users. Click Refresh to refresh the sessions status.

Chapter 6. ThinkServer Remote Management Module Web console options 25

Image 29

Contents ThinkServer RD330, RD430, RD530, and RD630 ThinkServer Management Module User GuideFirst Edition August Copyright Lenovo “Safety information” on pageAppendix B “Notices” on page Contents iiThinkServer Management Module User Guide Terminology Safety informationChapter 1. Introduction of the server chassis to provide ESD protection Security - open source SSL Compatible with IPMI 4ThinkServer Management Module User Guide Page 6ThinkServer Management Module User Guide Prestart 8ThinkServer Management Module User Guide Figure 1. Configuring IE ESC - setpFigure 2. Configuring IE ESC - setp Log-on Navigation 12ThinkServer Management Module User Guide Log-outStart the redirection console Chapter 5. Remote console KVM operationMain window of the remote console Menu bar of the remote consoleTools menu of the remote console Power menu of the remote consoleMacros menu of the remote console Viewing properties PropertiesViewing the System Event Log Server informationViewing sensor readings Platform Events Event managementPlatform Events Trap Settings Email Settings Serial Over LANEmail Settings SMTP Trap Settings SNMPSerial Over LAN Figure 9. Trap SettingsRemote management Remote controlFigure 13. Remote management launch Virtual mediaFigure 12. Remote management configuration Figure 14. Redirecting virtual device Power controlFigure 15. Power control Network ConfigurationSecurity Network securityUsers Figure 17. Network security settingsIPMI ServiceFigure 19. Users setting Figure 20. Service settingSession LDAP UpdateFigure 22. Session settings Figure 23. LDAP settingsUtilities Figure 25. Utilities LanguagesAppendix A. Frequently asked questions 30ThinkServer Management Module User Guide Lenovo United States, Inc Appendix B. Notices1009 Think Place - Building One Morrisville, NC U.S.A Attention Lenovo Director of Licensing32ThinkServer Management Module User Guide Trademarks