Lenovo RD630, RD330, RD530 manual

Page 9

Manual background

Chapter 3. Configuration of the ThinkServer Remote Management Module

This topic describes how to use the server configuration utility to change the Remote Management Module from the un-configured status to the running status. When first installed, the Remote Management Module by default will search DHCP server on the network to automatically assign IP address, subnet mask and gateway. It is recommended that users manually set a fixed IP address in the BIOS.

To set an IP address, do the following:

1.Press F1 as soon as you see the logo screen.

2.From the BIOS setup menu, select Server Management ➙ BMC Network Configuration ➙ Configuration Address Source.

3.From the Configuration option, you can choose STATIC or DHCP to set IP address.

4.When you finish the configuration, save the settings.

Table 1. IPMI 2.0 Configuration submenu

	Configuration	STATIC	Static IP configuration. IP and the subnet mask can be set manually.
	Address
	Address	DHCP	Dynamic IP configuration. The system can obtain IP automatically.
	Source	DHCP
	Source

© Copyright Lenovo 2012

5

Image 9

Contents ThinkServer RD330, RD430, RD530, and RD630 ThinkServer Management Module User Guide“Safety information” on page Appendix B “Notices” on pageFirst Edition August Copyright Lenovo Contents iiThinkServer Management Module User Guide Safety information Chapter 1. IntroductionTerminology of the server chassis to provide ESD protection Security - open source SSL Compatible with IPMI 4ThinkServer Management Module User Guide Page 6ThinkServer Management Module User Guide Prestart 8ThinkServer Management Module User Guide Figure 1. Configuring IE ESC - setpFigure 2. Configuring IE ESC - setp Log-on Navigation 12ThinkServer Management Module User Guide Log-outStart the redirection console Chapter 5. Remote console KVM operationMain window of the remote console Menu bar of the remote consolePower menu of the remote console Macros menu of the remote consoleTools menu of the remote console Viewing properties PropertiesServer information Viewing sensor readingsViewing the System Event Log Platform Events Event managementPlatform Events Trap Settings Email Settings Serial Over LANEmail Settings SMTP Trap Settings SNMPSerial Over LAN Figure 9. Trap SettingsRemote management Remote controlVirtual media Figure 12. Remote management configurationFigure 13. Remote management launch Power control Figure 15. Power controlFigure 14. Redirecting virtual device Network ConfigurationSecurity Network securityUsers Figure 17. Network security settingsIPMI ServiceFigure 19. Users setting Figure 20. Service settingSession LDAP UpdateFigure 22. Session settings Figure 23. LDAP settingsUtilities Figure 25. Utilities LanguagesAppendix A. Frequently asked questions 30ThinkServer Management Module User Guide Lenovo United States, Inc Appendix B. Notices1009 Think Place - Building One Morrisville, NC U.S.A Attention Lenovo Director of Licensing32ThinkServer Management Module User Guide Trademarks