Lenovo RD330, RD630, RD530 manual Utilities

Page 31

Utilities

Figure 24. Firmware update

Firmware update steps:

1.Browse to or enter the path where the firmware image file resides.

2.Select update type.

3.Click the Upload button. If the file is a valid file, all other sessions will be terminated and the image upload will begin.

4.For a successful upload, the current firmware version and the version of the new file will be displayed, as well as the Preserve Configuration checkbox, Update button, and Cancel button.

5.Click the Update button to begin the firmware update process and view the update status. When the update is completed, the embedded software will reboot automatically. If you click the Cancel button, the process will be terminated and the embedded software will reboot.

6.Wait for a minute after the firmware is updated, reopen the browser logon page, enter the user name and password to log on again.

Utilities

Utilities provide BMC reboot and factory default restore functions.

•To reboot the remote management server, click Reboot.

•To reset the setting values to the factory default values, click Factory Default.

Chapter 6. ThinkServer Remote Management Module Web console options 27

Image 31

Contents ThinkServer RD330, RD430, RD530, and RD630 ThinkServer Management Module User GuideAppendix B “Notices” on page “Safety information” on pageFirst Edition August Copyright Lenovo Contents iiThinkServer Management Module User Guide Chapter 1. Introduction Safety informationTerminology of the server chassis to provide ESD protection Security - open source SSL Compatible with IPMI 4ThinkServer Management Module User Guide Page 6ThinkServer Management Module User Guide Prestart 8ThinkServer Management Module User Guide Figure 1. Configuring IE ESC - setpFigure 2. Configuring IE ESC - setp Log-on Navigation 12ThinkServer Management Module User Guide Log-outMenu bar of the remote console Chapter 5. Remote console KVM operationStart the redirection console Main window of the remote consoleMacros menu of the remote console Power menu of the remote consoleTools menu of the remote console Viewing properties PropertiesViewing sensor readings Server informationViewing the System Event Log Serial Over LAN Event managementPlatform Events Platform Events Trap Settings Email SettingsFigure 9. Trap Settings Trap Settings SNMPEmail Settings SMTP Serial Over LANRemote management Remote controlFigure 12. Remote management configuration Virtual mediaFigure 13. Remote management launch Figure 15. Power control Power controlFigure 14. Redirecting virtual device Network ConfigurationFigure 17. Network security settings Network securitySecurity UsersFigure 20. Service setting ServiceIPMI Figure 19. Users settingSession Figure 23. LDAP settings UpdateLDAP Figure 22. Session settingsUtilities Figure 25. Utilities LanguagesAppendix A. Frequently asked questions 30ThinkServer Management Module User Guide U.S.A Attention Lenovo Director of Licensing Appendix B. NoticesLenovo United States, Inc 1009 Think Place - Building One Morrisville, NC32ThinkServer Management Module User Guide Trademarks