To connect the Lenovo USB 2.0 Super
Figure 1-1. Configuration 1: self power (AC adapter) configuration
1.Turn on your computer.
2.Connect the AC adapter to the DC IN connector1 on the USB 2.0 Super
3. Using the USB cable, insert the cable plug 2 into the USB connector of the drive.
4.Plug the standard USB connector 3into the USB port of your computer.
5.Plug the power supply4 into an outlet.
Configuration 2: Connecting the drive using standard USB bus power
Requirements
vOne standard USB cable (shipped with this option).
vOne USB port (available on your system).
Specifications
Read and write of CD and DVD media are supported.
Note: Read and Write speeds are the same as with the AC adapter.
Read speeds for Configuration 2
Media | Max speed with USB Standard Bus | Disc spin method |
| Power |
|
|
|
|
8x | CAV | |
|
|
|
6x | CAV | |
|
|
|
8x | CAV | |
|
|
|
4x | CAV | |
|
|
|
8x | CAV | |
|
|
|
4x | CAV | |
|
|
|
2x | ZCLV | |
|
|
|
5x | PCLV | |
|
|
|
DVD+R | 8x | CAV |
|
|
|
DVD+R DL | 4x | CAV |
|
|
|
DVD+RW (4.7 GB) | 6x | CAV |
|
|
|
24x | CAV | |
|
|
|
24x | CAV | |
|
|
|
Chapter 1. Lenovo USB 2.0 Super