Sanyo PLC-XU78, PLC-XU75 owner manual Remote Control Battery Installation, Operating Range

Page 12

Part Names and Functions

Remote Control Battery Installation

1

Open the battery

2

Install new batteries

3

Replace the

 

compartment lid.

 

into the compartment.

 

compartment lid.

Two AA size batteries

For correct polarity

(+ and –), be sure battery terminals are in contact with pins in the compartment.

To insure safe operation, please observe the following precautions:

Use two (2) AA or LR6 type alkaline batteries.

Always replace batteries in sets.

Do not use a new battery with a used battery.

Avoid contact with water or liquid.

Do not expose the remote control to moisture or heat.

Do not drop the remote control.

If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

Risk of explosion if a battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Operating Range

Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 16.4' (5 m) and 60° in front of the projector.

16.4' 30° (5 m)

Remote control

30°

12

Image 12 Contents
Model PLC-XU75 PLC-XU78 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandInstalling the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communications Commission Notice Part Names and Functions Front Back BottomRear Terminal Top Control Remote Control Remote Control Battery Installation Operating RangeInstallation Adjustable FeetPositioning the Projector Connecting the AC Power Cord Projector sideConnecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video Equipment Selected Input Source and Lamp Mode Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Zoom and Focus Adjustment Keystone CorrectionSound Adjustment Remote Control OperationTimer button Auto PC buttonZoom buttons Image buttonComputer Input Input Source SelectionDirect Operation Source Select MenuComputer System Selection Auto PC Adjustment To store adjustment parametersMenu Operation Auto PC Adj Manual PC Adjustment Reset Mode freeTo clear adjusted data To store adjusted dataImage Level Selection Image Level Adjustment Screen Size Adjustment NormalTrue WideCustom For zooming in and out the images Digital zoom +Digital zoom Video Input Input Source Selection Video, S-VideoSource Select Menu Video Input Source Selection Component, RGB Scart 21-pin Video System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image 1~4Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting SettingLogo Logo and Logo PIN code lock settings DisplayLogo select Capture Logo PIN code lockTo Enter the Logo PIN code Ceiling RearInput search Ceiling RearTerminal On start Security Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock setting Change the PIN codeFactory default FanLamp counter Maintenance and Cleaning Then check the matters belowCleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the lamp replacement counterLamp Handling Precautions Lamp Replacement CounterTroubleshooting AppendixAppendix Menu Tree Image SelectAppendix Video Input Indicators and Projector Condition Indicators Projector ConditionCompatible Computer Specifications ResolutionTechnical Specifications Mechanical InformationOptional Parts Configurations of Terminals DimensionsTerminal Mini DIN 8-PIN Lamp Replacement Label PIN Code Number MemoKH3AC
Related manuals
Manual 1 pages 34.98 Kb