Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
| Indicators |
| Projector Condition | ||
POWER |
| WARNING |
| LAMP | |
| TEMP. |
| REPLACE |
| |
red/green |
|
|
| ||
| red |
| yellow |
| |
|
|
|
| ||
|
|
|
|
| The projector is off. (The AC power cord is unplugged.) |
|
|
|
|
|
|
|
|
|
|
| The projector is preparing for |
|
|
|
| ✽ | lamp is being cooled down. The projector cannot be |
|
|
|
|
| turned on until cooling is completed. |
|
|
|
|
|
|
|
|
|
| ✽ | The projector is ready to be turned on with the POWER |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ✽ | The projector is operating normally. |
|
|
|
|
|
|
|
|
|
| ✽ | The projector is in the Power management mode. |
|
|
|
|
|
|
|
|
|
|
| The temperature inside the projector is abnormally |
|
|
|
|
| high. The projector cannot be turned on. When the |
|
|
|
| ✽ | projector is cooled down enough and the temperature |
|
|
|
| returns to normal, the POWER indicator lights red and | |
|
|
|
|
| the projector can be turned on. (The WARNING TEMP. |
|
|
|
|
| indicator keeps blinking.) Check and clean the air filters. |
|
|
|
|
| The projector has been cooled down enough and the |
|
|
|
| ✽ | temperature returns to normal. When turning on the |
|
|
|
| projector, the WARNING TEMP. indicator stops blinking. | |
|
|
|
|
| Check and clean the air filters. |
|
|
|
|
| The projector detects an abnormal condition and cannot |
|
|
|
|
| be turned on. Unplug the AC power cord and plug it |
|
|
|
|
| again to turn on the projector. If the projector is turned |
|
|
|
| ✽ | off again, disconnect the AC power cord and contact the |
|
|
|
|
| dealer or the service center for service and checkup. |
|
|
|
|
| Do not leave the projector on. It may cause an electric |
|
|
|
|
| shock or a fire hazard. |
• • • green | • • • red | • • • off |
• • • blinks green | • • • blinks red |
|
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 55 and 56.
61