Sanyo PLC-XW50A, PLC-XW55A, PLC-XW55K, PLC-XW55G To the Owner, Risk of Electric Shock Do not Open

Page 4

To the Owner

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section on pages 56-57 of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

NOTE: This symbol and recycle system are applied to EU countries only and not applied to the countries in the other area of the world.

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Safety Precaution

WARNING: TO R E D U C E T H E R I S K O F F I R E O R ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

–This projector produces intense light from the projection lens. Do not stare directly into the lens,otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

–Install the projector in a proper position. If not, it may result in a fire hazard.

–Allowing the proper amount of space on the top, sides, and rear of the projector is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

–Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.

SIDE and TOP

REAR

0.7'(20cm)

 

 

 

 

 

 

 

 

 

 

 

1.5'(50cm)

 

3'(1m)

 

 

 

3'(1m)

 

 

 

 

 

 

 

 

–If the projector is not to be used for an extended time, unplug the projector from the power outlet.

CAUTION

Do not set the projector in greasy, wet, or smoky conditions such as IN a kitchen to prevent A Breakdown or a disaster. If The PROJECTor comes in contact with oil or chemicals, IT may become deteriorated.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.



Page 3 Page 5
Image 4
Page 3 Page 5
Contents Multimedia Projector Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticeFront Back Bottom Part Names and FunctionsSlide Shutter Lever u Air Intake Vent Exhaust Vents Rear Terminal Top Control Remote Control Remote Control Battery Installation Operating RangeAdjustable Foot InstallationPositioning the Projector Connecting the AC Power Cord Projector side AC outlet sideConnecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video Equipment Selected Input Source and Lamp Mode Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Zoom Adjustment Screen Position AdjustmentFocus Adjustment Keystone CorrectionSound Adjustment Remote Control OperationTimer button Auto PC buttonZoom buttons Keystone buttonComputer Input Input Source SelectionDirect Operation Source Select MenuComputer System Selection Selecting Computer System ManuallyAuto PC Adjustment To store adjustment parametersPC Adjust Menu Menu Operation Auto PC AdjManual PC Adjustment Reset Mode freeTo clear adjusted data To store adjusted dataImage Level Selection Image Level Adjustment Screen Size Adjustment NormalTrue WideDigital zoom + For zooming in and out the imagesDigital zoom Video Input Input Source Selection VideoInput Source Selection S-Video, Component, RGB Scart 21-pin Direct Operation Top ControlVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image 1~4Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting SettingDisplay Logo Logo and Logo PIN code lock settingsLogo select Capture Logo PIN code lockTo Enter the Logo PIN code Ceiling RearInput search Ceiling RearPower management On start Remote control On startKey lock Security Key lock and PIN code lock settingsPIN code lock Change the PIN code lock setting Change the PIN codeFan Factory defaultLamp counter Maintenance and Cleaning Then check the matters belowCleaning the Air Filters Slide ShutterCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the lamp replacement counterLamp Handling Precautions Lamp Replacement CounterTroubleshooting AppendixAppendix Image Adjust Menu TreeAppendix Video Input Indicators and Projector Condition IndicatorsCompatible Computer Specifications FreqTechnical Specifications Mechanical InformationOptional Parts Terminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsTerminal Mini DIN 8-PIN Logo PIN Code Lock No PIN Code Number MemoKR6AD

PLC-XW55G, PLC-XW55K, PLC-XW50A, PLC-XW55A specifications

The Sanyo PLC-XW55A, PLC-XW50A, PLC-XW55K, and PLC-XW55G are notable projectors designed to meet the demanding needs of both business and educational environments. These models are characterized by their high brightness, impressive resolution, and advanced features, making them suitable for various applications, from large conference rooms to classrooms.

One of the standout features of these projectors is their brightness. With up to 5,000 ANSI lumens, they are capable of delivering clear and vibrant images even in well-lit environments. This high brightness level ensures that presentations remain visible and impactful, regardless of ambient light conditions. Additionally, these models support XGA resolution (1024 x 768), providing clarity and detail that enhances the viewing experience.

The Sanyo PLC-XW55A and its variants utilize advanced LCD technology, which enriches colors and improves image sharpness. This technology helps to produce sharp, vivid images that effectively capture the audience's attention. Moreover, they offer a high contrast ratio, which contributes to deeper blacks and brighter whites, resulting in an overall enhanced visual experience.

Another key characteristic of these projectors is their versatility in connectivity options. Equipped with multiple inputs, including HDMI, VGA, and composite video, they accommodate a wide range of devices, such as laptops, Blu-ray players, and document cameras. This flexibility enables seamless integration into various audio-visual setups.

In terms of design, the Sanyo PLC-XW55 series projectors are compact and lightweight, which adds convenience for portability. Their user-friendly interface, along with remote control operation, simplifies setup and user experience. Furthermore, the projectors support vertical and horizontal keystone correction, allowing for easy adjustment of image distortion, ensuring a properly aligned projection even when the projector is not perfectly centered.

Finally, these projectors incorporate eco-friendly features, such as energy-efficient lamp technology, extending lamp life and reducing total cost of ownership. With an estimated lifespan of up to 4000 hours, users can minimize the frequency of replacements, making these models not only a practical choice but also a cost-effective one.

Overall, the Sanyo PLC-XW55A, PLC-XW50A, PLC-XW55K, and PLC-XW55G projectors stand out for their combination of brightness, resolution, connectivity, and ease of use, positioning them as ideal solutions for a range of professional and educational settings.
Top Page Image Contents