Sanyo PLC-XW50A, PLC-XW55A, PLC-XW55K, PLC-XW55G owner manual Cleaning the Air Filters, Slide Shutter

Page 52

Maintenance and Cleaning

Cleaning the Air Filters

Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean the air filters following the steps below.

1

Turn off the projector, and disconnect the AC power

 

cord from the AC outlet.

2

Turn over the projector and remove the air filters by

 

pulling the latches upward.

3

Clean the air filters with a brush or rinse them

 

softly.

4

When cleaning the air filters by rinsing, dry them

 

well. Replace the air filters properly. Make sure

that the air filters are fully inserted.

CAUTION

Do not operate the projector with the air filters removed. Dust may accumulate on the optical elements degrading picture quality.

Do not put small parts into the air intake vents. It may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments may cause a poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector. This condition may degrade the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Air filters

Pull up and remove.

Note:

Be sure to reinsert the air filters in the proper direction.

Slide Shutter

Slide Shutter Lever

Slide Shutter is provided to protect the surface of the lens against scratches and dirt. When you are not using the projector, close the Slide Shutter.

To open or close, use the Slide Shutter Lever on the top of the cabinet.

Do not close the shutter when the projection lamp is lighting.

Slide Shutter

52

Image 52
Contents Multimedia Projector Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticeFront Back Bottom Part Names and FunctionsSlide Shutter Lever u Air Intake Vent Exhaust Vents Rear Terminal Top Control Remote Control Remote Control Battery Installation Operating RangeAdjustable Foot InstallationPositioning the Projector Connecting the AC Power Cord Projector side AC outlet sideConnecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video Equipment Selected Input Source and Lamp Mode Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Zoom Adjustment Screen Position AdjustmentFocus Adjustment Keystone CorrectionSound Adjustment Remote Control OperationTimer button Auto PC buttonZoom buttons Keystone buttonComputer Input Input Source SelectionDirect Operation Source Select MenuComputer System Selection Selecting Computer System ManuallyAuto PC Adjustment To store adjustment parametersPC Adjust Menu Menu Operation Auto PC AdjManual PC Adjustment Reset Mode freeTo clear adjusted data To store adjusted dataImage Level Selection Image Level Adjustment Screen Size Adjustment NormalTrue WideDigital zoom + For zooming in and out the imagesDigital zoom Video Input Input Source Selection VideoInput Source Selection S-Video, Component, RGB Scart 21-pin Direct Operation Top ControlVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image 1~4Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting SettingDisplay Logo Logo and Logo PIN code lock settingsLogo select Capture Logo PIN code lockTo Enter the Logo PIN code Ceiling RearInput search Ceiling RearPower management On start Remote control On startKey lock Security Key lock and PIN code lock settingsPIN code lock Change the PIN code lock setting Change the PIN codeFan Factory defaultLamp counter Maintenance and Cleaning Then check the matters belowCleaning the Air Filters Slide ShutterCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the lamp replacement counterLamp Handling Precautions Lamp Replacement CounterTroubleshooting AppendixAppendix Image Adjust Menu TreeAppendix Video Input Indicators and Projector Condition IndicatorsCompatible Computer Specifications FreqTechnical Specifications Mechanical InformationOptional Parts Terminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsTerminal Mini DIN 8-PIN Logo PIN Code Lock No PIN Code Number MemoKR6AD

PLC-XW55G, PLC-XW55K, PLC-XW50A, PLC-XW55A specifications

The Sanyo PLC-XW55A, PLC-XW50A, PLC-XW55K, and PLC-XW55G are notable projectors designed to meet the demanding needs of both business and educational environments. These models are characterized by their high brightness, impressive resolution, and advanced features, making them suitable for various applications, from large conference rooms to classrooms.

One of the standout features of these projectors is their brightness. With up to 5,000 ANSI lumens, they are capable of delivering clear and vibrant images even in well-lit environments. This high brightness level ensures that presentations remain visible and impactful, regardless of ambient light conditions. Additionally, these models support XGA resolution (1024 x 768), providing clarity and detail that enhances the viewing experience.

The Sanyo PLC-XW55A and its variants utilize advanced LCD technology, which enriches colors and improves image sharpness. This technology helps to produce sharp, vivid images that effectively capture the audience's attention. Moreover, they offer a high contrast ratio, which contributes to deeper blacks and brighter whites, resulting in an overall enhanced visual experience.

Another key characteristic of these projectors is their versatility in connectivity options. Equipped with multiple inputs, including HDMI, VGA, and composite video, they accommodate a wide range of devices, such as laptops, Blu-ray players, and document cameras. This flexibility enables seamless integration into various audio-visual setups.

In terms of design, the Sanyo PLC-XW55 series projectors are compact and lightweight, which adds convenience for portability. Their user-friendly interface, along with remote control operation, simplifies setup and user experience. Furthermore, the projectors support vertical and horizontal keystone correction, allowing for easy adjustment of image distortion, ensuring a properly aligned projection even when the projector is not perfectly centered.

Finally, these projectors incorporate eco-friendly features, such as energy-efficient lamp technology, extending lamp life and reducing total cost of ownership. With an estimated lifespan of up to 4000 hours, users can minimize the frequency of replacements, making these models not only a practical choice but also a cost-effective one.

Overall, the Sanyo PLC-XW55A, PLC-XW50A, PLC-XW55K, and PLC-XW55G projectors stand out for their combination of brightness, resolution, connectivity, and ease of use, positioning them as ideal solutions for a range of professional and educational settings.