Important Note:
When you attempt to transcribe a data file of the
Note:
IBM ViaVoice Millennium must be used.
IBM and ViaVoice are registered trademarks of International Business Machines Corporation.
Creating a data file for transcription
1.Press the n button to turn on the power.
2.Select the “DICTATING” recording mode.
3.Select the “STANDARD” recording time mode.
4.Press the mbutton, then start dictating (when dictating, pay attention to “Notes on enrolling”).
Transcribing a data file
Note:
Only the data file recorded under the “DICTATING” recording mode and the “STANDARD” recording time mode can be used for transcription.
1.Connect the unit to the PC using the DIGITAL I/O cable and Parallel port Adapter.
2.Operate the PC and select a file to be transcribed. (Follow the instructions on the
3.Click []. “ViaVoice” starts automatically and the selected file will be transcribed.
22